travolta002@gmail.com wrote: "However, FAT32 shares all of the other limitations of FAT16, and adds an important additional limitation?many operating systems that can recognize FAT16 will not work...

MachineMessiah wrote: If the board has a 2x4 (8 pin connector), it is prepared for high power consumption processors. A 2x2 connector, has two 12V wires, and if you allowed them to carry 6 amps...

Hi guys, I know this is completely off-topic for hardware, but can anyone reccomend a good domain registrar that is cheap, but *not* a reseller. I want to deal with the parent company itself not a...

padiq75@googlemail.com wrote: What strikes me is the Vista. This is a backwards step. Read the URLs in my sig. below. Then consider something like Ubuntu (Linux), which is totally...

"Grinder" <grinder@no.spam.maam.com> wrote in message news:PVOii.13647$Fc.8892@attbi_s21... Typical - just as I posted here to say nothing is happening over at rec.video.desktop, a reply arrives!

dean wrote: Check the maxtor hard drive page for diag utils; http://www.seagate.com/maxtor/ -- http://www.bootdisk.com/

Sjouke Burry wrote: You have now expanded the Hardware thread to third level without Mike Tomlinson making you into a fool. This is not fair!

On Tue, 03 Jul 2007 23:39:47 GMT, "ElJerid" <s.vanderhaeghen@pandora.be> wrote: I was under the impression the limitation was DPI, that it can't be done and still achieve the higher DPI that...

"Ken Maltby" <kmaltby@sbcglobal.net> wrote in message news:GOidnc6pav0OARfbnZ2dnUVZ_hadnZ2d@giganews.com... Turns out it was a 440 CDT Satellite Pro, that I have. Your 420, obviously isn't the...

RMW wrote: Since we were talking about the PSU and whether it is working, you would probe a minimum of one pin for each rail. If the +5V has four pins, measuring at one of them gives a...

On Mon, 2 Jul 2007 06:30:32 -0400, "dennis" <dennis@home.net> wrote: There is another option, cracking the case open, cutting a hole where the case will allow to mount a very low RPM (to keep...

ProfGene wrote: Main power supply or, more likely, horizontal output transistor?

"UseNet" <Cal@obded.org> wrote in message news:tKchi.491$eY.25@newssvr13.news.prodigy.net... Think of the first one as a 2 lane motorway, but your drive only needs one lane. the second one is a 4...

"George H" <geoh@address.invalid> wrote in message news:f6aa4m$fuv$1@aioe.org... OK I thought it was only done during setup.........thanks

I wonder if you can help me. I have a VHS video tape with some home movies on. I want to convert the home movies from video to DVD. Then on my computer, I want to save sections of the home movies...

A larger cache will improve performance mostly when there are concurring write operations. westnet wrote: -- Mike Walsh West Palm Beach, Florida, U.S.A.

On Sun, 1 Jul 2007 10:06:08 -0400, "dennis" <dennis@home.net> wrote: That's a bit odd, usually a drive does not fail then become accessible again merely jumpering from master to slave. Most likely...

ATTN: Cross. FuT set. Greetings to all, So, as the subject says, I am curious what GPU is used on Quadro FX550 cards. The reason I am perplexed comes from...

~misfit~ wrote: That "help" should read "held". :-( Shaun.

Hi there. logitech make a transmitter. plugs into your usb port and into some rca inputs on your receiver. Its call Logitech Music Anywhere. I picked mine up on ebay for just under $100 bout a year...