- Processor speed
- Posted by pc on September 6th, 2003
I have an Athlon 1800+ cpu but it's only showing up as 1150 in start mode.
How do I adjust this? I can get into bios mode but need directions after
that.........thanks??
- Posted by jeroen on September 6th, 2003
In article <3f59ea1c_2@mk-nntp-1.news.uk.worldonline.com>,
pc@utopia.co.uk says...
2. get the latest bios update for your mobo.
3. see 1.
--
Met vriendelijke groeten/Best regards
Jeroen Wijnands
http://spam.pagina.nl
- Posted by Buffalo on September 7th, 2003
Once in the BIOS, you should be able to find a section that lets you change
the bus speed to 133MHz. You usually use the PageUp and PageDown buttons to
change the values. Exit and save.
Right now you are only running at a bus speed of 100MHz, hence the lower
speed.
Some motherboards have jumpers on them to change that speed, instead of
using the BIOS.
If you have a manual, read it. If not, download one online.
If you don't know which MotherBoard you have , this page may help:
http://www.motherboards.org/
"pc" <pc@utopia.co.uk> wrote in message
news:3f59ea1c_2@mk-nntp-1.news.uk.worldonline.com...
- Posted by Patrick on September 7th, 2003
pc wrote:
I may be stateing the obvious but,
The + sign after the 1800 indicates that the AMD dosn't actually run at that
speed but performance wise it compares with a Pentium that dose run at that
speed.
