Tech Support > Computer Hardware > Desktops > CamStudio codec problem
CamStudio codec problem
Posted by Terry Pinnell on March 1st, 2008


Can anyone help me isolate this problem please? I use CamStudio 2.00
for screen captures. In the past I've accepted the default codec,
'CamStudio Lossless Codev v 1.00' without thinking much about it. I've
tried DivX a few times, but the quality after import into my editors
(Magix MEP, Womble) and rendering to DVD MPEG was rather poor.
Recently I installed a new codec, based on the following advice (can't
find the origin right now):
"Use the MSU Screen Capture Lossless Codec as it creates smaller files
than the Techsmith Screen Capture Codec
http://www.compression.ru/video/ls-c..._codec_en.html

But after using this in Video Options|Compressor, I get the following
behaviour:
- The immediate playback in CamStudio is corrupted (many coloured
stripes)
- Same result when I play it after importing to Magix MEP.
- Yet it plays fine in VirtualDub. File|Information reports:
Frame size, fps (us per frame) 1044x662, 25.000 fps (40000 uS)
Length: 178 frames (0:07.12)
Decompressor: MSU Screen Capture Lossless Code
Number of key frames:
Min/avg/max/total key frame size: 1267172/1267752/1268333 (2477K)
Min/avg/max/total delta frame size: 0/173/7994 (30K)
Data rate: 2883 kbps (0.17% overhead)

- If (without understanding) I use Gspot 'Proposed Codec Solutions and
Tests', steps 1 & 2, I get the following report, unintelligible to me:

(Src)-->>--(A)-->[Avi Splitter ]>--(B)-->[VFW:MSU Screen Capture
Lossless Codec v1.2 ]>--(C)-->[Video Renderer ]
Failed to create instance of Avi Splitter. CoCreateInstance() failed.
Error: 0x80040154: [unknown]
(Src)-->>--(A)-->[DivX Demux ]>--(B)-->[VFW:MSU Screen Capture
Lossless Codec v1.2 ]>--(C)-->[Video Renderer ]

Failed to connect Output pin 0x0658419c ("Src Media") on
Prague1-MSU.avi to input pin 0x065913b4 ("Stream") on filter
0x03eb6f6d ("DivX Demux").ConnectDirect() failed. Error: 0x80040207:
[unknown]

(Src)-->>--(A)-->[AVI Splitter ]>--(B)-->[VFW:MSU Screen Capture
Lossless Codec v1.2 ]>--(C)-->[Video Renderer ]
Video Render OK. Use [3] to play.

Here's what Gspot reports:
--- File Information --- File Name:
Prague1-MSU.avi File Name (with full path):
D:\Movies\Camstudio\Prague1-MSU.avi
File Size (in bytes): 2,572,800 ---
Container Information --- Base Type (e.g "AVI"):
AVI(.AVI) Subtype (e.g "OpenDML"): AVI v1.0,
Interleave (in ms):
Preload (in ms):
Audio alignment("split across interleaves"):
Total System Bitrate (kbps): 0
Bytes Missing (if any):
Number of Audio Streams:
--- Video Information --- Video Codec Type(e.g. "DIV3"):
SCLS
Video Codec Name(e.g. "DivX 3, Low-Motion"): <unknown> Video Codec
Status(e.g. "Codec Is Installed"): Codec(s) are Installed Duration
(hh:mm:ss): 0:07.120 Frame Count:
178
Frame Width (pixels): 1044
Frame Height (pixels): 662
Storage Aspect Ratio("SAR")" 1.577 Pixel Aspect
Ratio ("PAR"): 1.000 Display Aspect Ratio ("DAR"):
1.577 Fields Per Second:
Frames Per Second: 25.000
Pics Per Second: 25.000
Video Bitrate (kbps): 2883
MPEG-4 ("MPEG-4" or ""):
B-VOP ("B-VOP" or ""):
QPel ("QPel" or ""):
GMC ("GMC" or ""):
NVOP ("NVOP" or ""):
H264 ("H264" or ""):
Quality Factor (bits/pixel)/frame: 0.167"
Any advice would be appreciated please.

--
Terry, East Grinstead, UK


Similar Posts