Tech Support > Microsoft Windows > Hardware
Second Video Card Not Detected
Posted on May 9th, 2008 | 1 Comments

Is there a BIOS option that may control selection of more than one vidoe card? "Marty S" <Marty S@discussions.microsoft.com> wrote in...

Computer will not boot
Posted on May 9th, 2008 | 11 Comments

It doesn't have to be the exact disk used with that PC, if both are XP Pro, you can use the desktop CD install..

Defragment flash drive on Vista
Posted on May 9th, 2008 | 16 Comments

M.I.5¾ wrote: Do you have a site for this low figure today? I'm not finding it. Right. I've read that. But again, from the user's point of view, I don't think it comes down to 1000...

Disk Check Hang
Posted on May 9th, 2008 | 3 Comments

bhuwanp wrote: In addition to the reply by Bob I, make sure to do regular backups, especially of files on Drive E. Even if the manufacturer's diagnostics check out OK, do a long format on Drive E,...

Windows Problem
Posted on May 9th, 2008 | 1 Comments

On May 9, 1:07*pm, sudheer sharma wrote: Can you please clarify this post! It is very confusing! You crated a new folder and it was "cloned" to a different PC??

eSATA Drive Question
Posted on May 9th, 2008 | 21 Comments

As Anna says, you will not have a bootable external drive but you will have a fast external drive. The throughput will be six times usb or firewire, so go for it. "Anna" <myname@myisp.net> wrote in...

# of USB ports
Posted on May 9th, 2008 | 2 Comments

"Paul" <nospam@needed.com> wrote in message news:g01r6n$3ja$1@aioe.org... Aha, a new resource. Thanks!

can I use video cam as webcam ?
Posted on May 9th, 2008 | 4 Comments

"-keevill-" <keevill@gmail.com> wrote in message news:OYQTn$dsIHA.4392@TK2MSFTNGP03.phx.gbl... Looks like you have easy access to the device's memory, but somehow you need to make the camera present...

Processor Bus?
Posted on May 9th, 2008 | 9 Comments

Two of you 'users' care so far: you and the Troll of No Consequence. BTW, you're saying you could compress 50,000+ groups into one? That's a ridiculous argument. If somebody comes here complaining...

1000 gb hdd only recognizes 132 gb
Posted on May 9th, 2008 | 3 Comments

If you want to use all the drive as "C:\" then you need to use XP with SP1, SP2. If your setup disk is an original (which it sounds like it is) then you need to slipstream a new disk with SP2 or SP3...

Replacement for Canon MP750
Posted on May 9th, 2008 | 2 Comments

how about an mp470 they work pretty good. Less then a 100 dollars. "eganders" <eganders@yahoo.com> wrote in message news:7f6f7573-3064-4606-8066-dbd2197f43ee@s50g2000hsb.googlegroups.com...

Plextor PX- 712A
Posted on May 9th, 2008 | 4 Comments

Playing video requires your drive to move data MUCH faster than playing audio will. So it doesn't make sense that the drive is at fault. I would look for problems in your player software setups, or...

corrupted USB flash drive
Posted on May 9th, 2008 | 6 Comments

On May 8, 5:48*pm, Manlio <noem...@news.org> wrote: Not true! I moved my "corrupted" hard drie to a USB enclosure and TestDisk found it. However, due to the "type" of corruption, I was not...

Hard disk diagnostic tool
Posted on May 8th, 2008 | 6 Comments

You're welcome. JS "JoeP" <NoSpam@Hotmail.com> wrote in message news:Okft8mVsIHA.484@TK2MSFTNGP04.phx.gbl...

WinXPpro sp2 and proliant server with raid??
Posted on May 8th, 2008 | 6 Comments

Thanks Paul, I guess it might pay to keep a floppy drive and cable laying around. Brad "Paul" <nospam@needed.com> wrote in message news:fvfjjh$917$1@aioe.org...

crossover couplerr test
Posted on May 8th, 2008 | 7 Comments

"Andre De Clercq" <andre,declercq@pandora.be> wrote in message news:eS4z8oFsIHA.1952@TK2MSFTNGP05.phx.gbl...

started with "blue screen" ended up with "missing system32\hal.dll
Posted on May 8th, 2008 | 4 Comments

Kitti Can you post a copy of the complete report. Disable automatic restart on system failure. This should help by allowing time to write down the STOP code properly. Right click on the My...

How refresh the ACPI thermal zone temperature?
Posted on May 8th, 2008 | 2 Comments

Hello, it does not work with the Refresh method and the DoEvents. It is much more complex. I searched in the web for hours, and I find only people with the same problem, but no ansers. Maybe I post...

System Hang...problem is HDD or OS.
Posted on May 8th, 2008 | 4 Comments

your problem is in RAM. plz change your RAM or remove CMOS battery, turn on & off ur computer. place back ur CMOS battery if problem solved reply me.

Error messages on startup.
Posted on May 8th, 2008 | 6 Comments

"Paul" <nospam@needed.com> wrote in message news:fvu1jt$qd5$1@aioe.org... It may depend on the character of the control-card fault. I know nothing of these things except that my failed card gave...