When I decided to get Broad band I put in a dedicated extension of good
quality telephone cable. It did the job and I was getting a solid
connection with a decent download rate. Then I researched a bit more and
found out about Cat5 cable, but my connection was OK so I left things as
they were. Then two weeks ago I was upgraded to ADSLMax. Disappointing
download rates. When I checked the SNR it was fluctuating between 4 and
7, lots of errors. I decided to upgrade my cable to Cat5 just to see if
it might make a difference. I was amazed. The SNR jumped to around 12 or
14. Fewer errors, faster downloads. So it really is true about Cat5, it
does the business. : )

--
Paul reply-to is valid

"Paul" <Fintor@invalid.invalid> wrote in message
news:jfH0FVCqhCeFFwbh@panton.demon.co.uk...
Read all about it at http://en.wikipedia.org/wiki/Category_5_cable
I see there's now Cat 6 and Cat 7 available!

George

George Weston <george@removethisgeorgeweston.plus.com> wrote:
cable of some sort (in his case Cat5) as opposed to something more
'doubtful'. The fact that it's Cat5 is probably neither here nor
there as there is almost certainly a few km of non-Cat5 cable from the
exchange to his master socket.

--
Chris Green

<tinnews@isbd.co.uk> wrote in message
news:457836a1$0$623$bed64819@news.gradwell.net...
True but the exchange-to-master socket link is in all probability solid
copper strands throughout, rather than braided "flex". (Unless, of course,
he's one of the unfortunates who are served at some or all stages in the
link by aluminium.)


George

George Weston <george@removethisgeorgeweston.plus.com> wrote:
exchange-to-master socket link is in all probability solid copper
strands".

It doesn't matter a lot whether twisted pair is solid or multi-strand
flex, it's the twisting that makes it work better than untwisted
cable.

--
Chris Green

George Weston wrote:
(Cough)

I quote.....

There is no difference between Copper & Aluminium

From a training course recently attended, dealing with REIN.

My answer was rollocks (or words to that effect)

"George Weston" <george@REMOVETHISgeorgeweston.plus.com> wrote in message
news:4tqnrpF1528luU1@mid.individual.net...
improvement: better S/N and fewer dropouts. I'm about 4km from the exchange
so changing the last 10 metres does seem to make a difference.

In message <VNednenCWN5OzOXYRVnyvA@pipex.net>, Lex99
<dmcginlay@hot_mail.com> writes
away with an untwisted third ring wire on the leg between the master
socket and the extension?

I have had a similar improvement. My link went from about 3M to 6M
simply by disconnecting the ring wire at the master socket. This is a
single wire capacitativly coupled to one side of the twisted pair.
Presumably any high frequency noise that it collects will affect the
ADSL signal.

The whole of the rest of the trip to the exchange is twisted pair.

--
Peter R Cook

Peter R Cook wrote:
Shhhh You'll be giving all our secrets away if you go on like that
:-)

Peter R Cook wrote:

Disconnecting the ring wire to the extension did help for me.

I had no improvement with Cat 5 ( I did try it ) but then the wire was twisted
pair anyway.

Graham