- PPPoA Vs PPPoE and router problems
- Posted by John on August 21st, 2007
A friend of mine popped over today. His cable router had ceased to provide
broadband. He could still access the router home page but could not get
online.
I'm ADSL (Not cable) but according to the box the router does both. Plugged
the necessary cables in, accessed the router home page and tried to set up.
However PPPoA was not an option, PPPoE was so tried that but did not work.
There was a few other options something like PPTP & L2TP, tried them all but
no connection established.
Perhaps its just gone faulty (After all that's why it was at my house) or
perhaps it is not UK ADSL compliant. (Says on the box it it) I'm no
broadband geek and don't know what's different about the two protocols so
your opinions would be welcomed.
I tried ringing the contact phone number on the website but it does not
work!
http://www.kcorplifestyle.com/produc...5/KLS-6615.htm
--
John
- Posted by Gaz on August 21st, 2007
John wrote:
This router does not contain an adsl modem.
Gaz
- Posted by John on August 21st, 2007
"Mark" wrote in message
I had noticed it, however the wording on the box made it sound like this was
the only unit required for cable or ADSL access.
I suspect its dead, AFAIK this was the only unit used to obtain cable
broadband access.
Thanks
--
John
- Posted by Pete @ www.GymRatZ.co.uk on August 21st, 2007
John wrote:
It is suitable for either cable or ADSL however.... your mate has a
cable modem to which the router connects. Likewise, you would need to
plug it into a standalone ADSL modem to connect in place of your
combined ADSL modem/router.
Pete
--
http://www.gymratz.co.uk
- Posted by Lurch on August 21st, 2007
On Tue, 21 Aug 2007 20:25:52 +0100, "John" <tullyhubbert@ (Spam Trap)
yahoo.com> mused:
--
Regards,
Stuart.
- Posted by John on August 21st, 2007
"Lurch" wrote in message
Like I said I have ADSL, I've never used or indeed even seen cable
broadband. I got a phone call from a friend asking could they come to my
house to test their router which they claimed was compatible with cable and
ADSL. No mention of modems or coax cables, perhaps they have a coax to
RJ11/45 adapter cable ;o)
--
John
..
- Posted by Lurch on August 21st, 2007
On Tue, 21 Aug 2007 22:32:21 +0100, "John"
<tullyhubbert(REMOVESPAMTRAP)@yahoo.com> mused:
Hmm. Cable broadband comes in the building via a coax cable. First
thing it goes to is the cable modem, then via ethernet to the router.
Not sure how he's managed to make the router the only thing on the
line as you can't plug a ethernet router into a coax cable.
There is a possibility I suppose it's running via a set top box,
didn't think this was still a way of doing it though. Main thing to
check is that your mate has actually plugged it into the right thing,
and that he has actually got cable broadband.
--
Regards,
Stuart.
- Posted by dennis@home on August 22nd, 2007
"John" <tullyhubbert@ (Spam Trap) yahoo.com> wrote in message
news:0q6dnQrvR6HBoVbbnZ2dnUVZ8tyqnZ2d@pipex.net...
It will say cable/DSL router not ADSL router.
Easy to get confused if you don't know the difference between DSL and ADSL.
No it wasn't.
There is a cable modem that is required to get cable.
It may be built into the set top box but that is the old way of doing
things.
You can test the cable modem by using the PC without the router.. if it
works the router may be broken if it doesn't the cable service is broken.
- Posted by dennis@home on August 22nd, 2007
"John" <tullyhubbert(REMOVESPAMTRAP)@yahoo.com> wrote in message
news:femdnRxL4ahxxFbbnZ2dnUVZ8sylnZ2d@pipex.net...
If you just want to test the router connect a PC to its LAN and then plug
its WAN port into one of your routers LAN ports.
The router should get an address from your router and assign the PC an
address and it should work.
You may need to change the default LAN address if its the same as yours (but
you may not depending on how the routing software is written).
- Posted by John on August 22nd, 2007
dennis wrote in message
So he drip fed me a little more info today. As has been suggested by several
posters the coax which supplies his service splits, going to some form of
digi box receiver (For TV) and to a modem. The router is plugged into the
modem via an ethernet cable. He also failed to mention that it was actually
his fathers router (Who has cable) and that he had already taken it to his
own house (He also has cable) for test purposes (Where it also failed to
work) before trying it on my ADSL. He's buying a new one to replace it now.
Thanks for all the suggestions, I now know a little more about cable but as
I live in the sticks I doubt I'll ever put it to much use!
--
John