- XTE-2005 - Filtered faceplates
- Posted by diy-newby on February 1st, 2008
Hi guys
Thinking of replacing the standard faceplate on the my BT master socket with
an XTE-2005 filtered one.
Does fitting one of these improve the reliability / speed of the connection?
- Posted by Roger Mills on February 1st, 2008
In an earlier contribution to this discussion,
diy-newby <asas@asas.com> wrote:
Depends how good/bad it is to start with. It certainly shouldn't make it any
worse, and it may well make it better.
--
Cheers,
Roger
______
Email address maintained for newsgroup use only, and not regularly
monitored.. Messages sent to it may not be read for several weeks.
PLEASE REPLY TO NEWSGROUP!
- Posted by naza on February 1st, 2008
In a nutshell if your house phone wiring is crap, close to power
cables or sources of interference then it will make a difference even
if it may be slight. The simple way to test this is remove your front
faceplate and plug you modem into the test socket. If you get a better
speed then having a faceplate will get you that speed if not then
installing a faceplate will make no difference. All the faceplate does
is give you the speed/reliability that you get from your test socket
- Posted by ato_zee@hotmail.com on February 1st, 2008
At a price.
You can, as I have done, put two cheapo T-style CE
(Chinese Export) filters in series.
First one to the Master Socket, plug RJ11 into it
for unfiltered ADSL. Also plug second one into
it.
Now plug phones into second one.
Caller ID unit still works, no noticeable impairment
of phone speech quality, or ringing.
My BRAS profile was all over the place.
AFAIR values around 1500, 2400, 3200, now
for extended periods, it sticks at the higher rate.
I presume if it drops, local interference, or
more likely it's lapping over the top of the
wellies of the guy pumping water out of
the manhole.
- Posted by A.N.Other on February 2nd, 2008
On Fri, 1 Feb 2008 15:08:42 -0000, "diy-newby" <asas@asas.com> wrote:
Worked for me. Got another 2Mb/s from it, but as t'other chap said,
try using your test socket for a while first to evaluate the gain.
- Posted by Herman on February 2nd, 2008
"A.N.Other" <fred@any.com> wrote in message
news:tsh7q3te0joouavm4i45k7hnh7cfcrf79c@4ax.com...
I agree. Also you can get BT wholesale *estimates* of what your line should
be giving you based on distance and exchange equipment at
http://www.samknows.com/broadband/sdchecker.php. This is of course just an
estimate which does not take into account actual line distance or other
factors.
- Posted by Herman on February 2nd, 2008
"Herman" <whitehouse.madhousetakemeout@bigfoot.com> wrote in message
news:fo1i59$5cq$1@aioe.org...
