- Backup X31 WinXP to SCSI Tape Drive
- Posted by * * Chas on November 3rd, 2004
I bought an X31 2885RGU, PM 1.6Ghz, with 1GB of memory and a 40GB HDD.
Is there a GOOD program that I can use for making Disk Images of my X31
WinXP NTFS drive using my Seagate DAT3 SCSI tape drive via an Adaptec SCSI
PC Card?
The first time I started the X31, the IBM setup program automatically
converted the HDD to NTFS! This ticked me off because I wanted to set this
PC up to dual boot plus now I have to buy all new disk utilities!
I've been using Norton Ghost running from a Floppy Disk. I have Ghost 5.1,
2000 and 2002. The old 1999 5.1 version has been the most reliable and
easiest to work with.
From what I've seen, these versions of Ghost either have problems with
NTFS or they can't be used to do a restore because they run on DOS and
they can't see the NTFS formatted drive.
Symantec bought out Power Quest; Norton Ghost 2003 seems to be PQ's Drive
Image which doesn't support Tape Drives.
Any suggestions or should I just bite the bullet and get an external USB
HDD.
--
Chas. verktyg@aol.spamski.com (Drop spamski to E-mail me)
- Posted by Michael Tissington on November 3rd, 2004
PowerQuest and V2i works well - you can boot from a CD and it will see NTFS
partitions without any problems.
--
Michael Tissington
http://www.oaklodge.com
http://www.tabtag.com
"* * Chas" <dnafutz@aol.spam.com> wrote in message
news:Q7CdnexGJcfjoBTcRVn-pg@comcast.com...
- Posted by Joe Davis on November 3rd, 2004
....
you want, or you can partition it and convert the new part to FAT32 so you
can run your old utilities.
- Posted by * * Chas on November 4th, 2004
"Michael Tissington" <michael@nospam.com> wrote in message
news:10oiglj5rj22c59@corp.supernews.com...
Thanks for the response. I'm not talking about standard backup software. I
want to make regular disk images of my complete HDD with a portable SCSI
Tape Drive.
How would I then go about making a drive image with a program like Norton
Ghost?
Are you suggesting that I boot with a floppy and then run the programs
from the HDD?
--
Chas. verktyg@aol.spamski.com (Drop spamski to E-mail me)
- Posted by Michael Tissington on November 4th, 2004
I'm not sure about backing up to Tape BUT the PowerQuest software will
create an image to CD - may even work to Tape, you'll have to check. It runs
under WIndows XP or you can boot off a CD to do the backup and restore.
--
Michael Tissington
http://www.oaklodge.com
http://www.tabtag.com
"* * Chas" <dnafutz@aol.spam.com> wrote in message
news:Bf6dnTJwnLPuERTcRVn-sg@comcast.com...
