Hi

When I connect my IPod (latest gen) to my Thinkpad T40 (which I KNOW
has
USB2.0 ports) (running Win 2003), I get the above message.

When I look at Device Manager and list connections by type, I see many
USB
Hubs, and one USB Enhanced 2.0 Hub; the IPod is connected to one of the

other ones.

When I called IBM, they had me install a chipset driver. That didn't do

anything.

Then I uninstalled all the hubs other than the USB2.0, and my IPod
showed
up on USB2.0 on the next connect, but my external mouse (which also is
on
one of the other hubs) disappeared.

My questions:
1. How can I make my IPod always show up on the USB2.0 hub?
2. If this laptop's ports are supposed to be USB2.0, why would devices
show up on some USB1.1 hub anyway?


HH

n0sferatu wrote:

I think this might be Windows lying to us.

I have a similar problem. I connected a no-name powered USB hub to my
Dell desktop. I constantly get pop-up messages announcing that this
USB-2 device would work faster if it were connected to a high-speed port.

My computer doesn't have any USB-1 ports, I don't think.

When I click on the pop-up balloon, as invited, for more info, I also
see a chart listing many USB ports. Like yours, only one of my 8 is
listed as high-speed.

I'm convinced this is a Windows XP problem of some sort, and I ignore it.

Does your iPod work O.K. when you connect it, despite the pop-up "error"
message?

Doug

"Doug Ellice" <DouglasSpamNotEllice@Comcast.NotSpam.net> wrote in message
news:Z5ydnfLhTOHeJDLcRVn-qg@comcast.com...
Yes it does.

The OHCI (USB1) ports are listed first (usually 2 ports to a root hub)

The EHCI (USB 2) port is the last one (usually as many ports as all the
above together.)

Is this no-name hub of which you speak a true USB2 hub? Unfortunately,
because the USB2 specification contains an ambiguity, hub, peripheral and
motherboard manufacturers are able to sell devices as USB2 devices but that
do not support the 480 Mbps high speed mode.

Some devices are occasionally encountered which require a USB2 specific
driver to be loaded otherwise they default to USB1. I have no knowledge if
the iPod is one of these devices.

This effect can also be seen if the USB cable that you use is not up to
performing at USB2 speeds (or is too long). This could also be true of a
true USB2 hub that has marginal performance. If the data is sufficiently
corrupt, the USB system down trains to USB1 speeds.

I have also encountered the occasional device that works in one port, but
not in another. Try plugging into a different port.

HTH

Ian.

I started having this problem using a USB 2.0 Hard Drive intermittantly back
in August. At first it would happen occasioanlly, then more often until
finally it happened every time

I tried all sorts of things and IBM tech support directed me to download and
install a Thinkpad specific update for Windows XP even though I already had
the IBM factory installed Windows XP --- they said try it, it can't hurt.

Back in October my battery charging circuit in the T40 fried itself and the
unit had to go in for a new systemboard. Since it came back I have not had
the USB problem again {knock on wood}.

I suggest that you report this to IBM and see if you can't get them to
replace the systemboard.

John



"n0sferatu" <n0sferatu@yahoo.com> wrote in message
news:1102006443.624311.126110@f14g2000cwb.googlegr oups.com...

The IPod works, but it works at USB1.1 speeds, which is useless because
it takes eons to transfer a few songs.

Oh crap. I hope this isn't it, it will be a pain in the ass to convince
them.

Right now, they're telling me they can't help because I am running
Windows 2003, which is not what they supplied me with.

HH

Windows 2003 is a server OS. Since it comes out of the box with USB 2.0
support, my guess is you might have to enable the high speed interface.
Check your error logs, those will more than likely point you too the
problem. Server 2003 might not have detected your USB ports properly either,
something to check on. You should see in your device manager, under
Universal Serial Bus Controllers something listed as a USB 2.0 enhanced Host
Controller. Hopefully I have given you a couple of avenues to check out.

Dan

n0sferatu wrote:

Angry Dan

I see the USB2.0 Enhanced Host controller in my Device Manager. The
IPod somehow always connects to the other ones, which seem to not be
2.0.

How do you enable hi speed interface?

HH

IF you see it in your Device Manager, then it is there. Check your error
logs, see if the system is throwing up an error when you plug in the IPod.
Start/Settings/Control
Panel, then Administrative tools/Computer Management. Look Under the event
viewer, and read your logs.

Dan

n0sferatu wrote:

"n0sferatu" <n0sferatu@yahoo.com> wrote in message
news:1102362360.716388.281620@z14g2000cwz.googlegr oups.com...
stopped working properly a couple months ago. I'm not sure if it was XP
service pack 2, or a BIOS or chipset update. I uninstalled SP2, and still
have the problem. Tried removing all the USB drivers and re-installing, but
still have problems. Sometimes devices aren't recognized, other times
they're recognized, but the TP thinks it has 1.1 ports instead of 2.0.

I think we may be out of luck until IBM and/or Microsoft figure this out.
Did you update the BIOS or chipset firmware recently?

Someone else had this machine before with Win2k, but they never tried
USB2.0 devices. I'm running Win2003, IBM won't support it beyond asking
me to update to the latest chipset driver (which I did).

I ran the latest embedded controller update, and also tried the latest
bios update.

HH