I just scanned my pc to see what RAM memory i have and it come out
that it's installed this one:


Maximum Memory Capacity: 2048MB
Currently Installed Memory: 1GB PC2700
Available Memory Slots: 0
Number of Banks: 2
Dual Channel Support: No
CPU Manufacturer: AuthenticAMD
CPU Family: AMD Athlon(tm) 64 Processor 3800+ Model 15, Stepping 0
CPU Speed: 1790 MHz


If i install this one will it work (i take out all the old memory and
install just one new slot of 2GB)?


Technology: DDR2-SDRAM
Capacity: 2 GB PC5300
Bus Clock: DDR2 667MHz (PC5300)
CAS Latency CL5
Memory Socket: SODIMM
Form Factor: 2GB SODIMM 200-pin
Voltage: 2.5V
Error Checking: Non-ECC
Memory Bandwidth: PC5300
Size & Bit: 128 x 8
Chip: Micron


Thanks

On Sep 27, 12:25 pm, me/2 <n...@127.0.0.1> wrote:
from wikepedia: The 200-pin SO-DIMM has two variations for locating
the notch that are nearly indistinguishable. If the notch is located
further outboard, it indicates the DDR class of memory. When the notch
is located towards the center of the board, it indicates DDR2. These
two types of memory are not interchangeable and thus have slightly
different notch locations that prevent cross installation. The PC2700
200-pin SO-DIMM depicted in the accompanying photograph shows a notch
slightly outboard, and is thus DDR. Caution should be exercised when
visually identifying 200-pin SO-DIMM modules