Hi all,

Do you know if there is a CAN (automotive network) stack under Linux ?

Do you know if there is a CAN stack emulator / simulator / analyser under
Linux ?

I need to experiment CAN under Linux.

TIA & BR,

Alain.

Alain RIBAULT wrote:
http://www.embeddedarm.com has a CAN bus card for their embedded boxes.
I don't know if they have a driver.

--Yan

Alain RIBAULT ha scritto:
Alain,
I suggest you to use SocketCAN, the newest (and the best) CAN technology
for linux
http://socketcan.berlios.de/

http://www.koansoftware.com/it/prd_svil_projects.htm
ftp://ftp.koansoftware.com/public/li...ocketcan1.diff

Best regards
--
Marco Cavallini
Koan s.a.s. - Bergamo - Italia
Embedded and Real-Time Software Engineering
- Atmel Third Party Consultant
- Intel PCA Developer Network Member
Tel. +39-(0)35-255.235 - Fax +39-178-223.9748
http://www.KoanSoftware.com - http://www.KaeilOS.com

On Tue, 20 Feb 2007 16:59:21 +0100, "Alain RIBAULT"
<alain.ribault@kereval.com> wrote:

If you are referring to low level CANbus, all you need is a device
driver. For instance the can4linux driver supports a few card types
and uses a standard open/read/write/select interface.

The only high level standard automotive protocols I can think of are
the J1939 engine control protocol and some GPS navigation protocols
which are built on CAN frames.

CANbus is also used as the lower level for industrial protocols such
as CanOpen and DeviceNet.

Paul

On Feb 20, 4:59 pm, "Alain RIBAULT" <alain.riba...@kereval.com> wrote:
have a look at these:

Open Components for Embedded Real-time Applications
http://www.ocera.org/

rtcan - realtime CAN on linux
http://sourceforge.net/projects/rtcan/

CanFestival CANopen Framework
http://canfestival.sourceforge.net/

-shaharyar