hello I am also into the development of custom SDIO card , and I need some hel in that regard. I am using a PIC microcontroller. And at present I a implementing only the SPI interface of the SDIO...

Grant Edwards wrote: I've also used the protothread mechanism *inside* an ISR, to replace a state machine.

In article <e268833f-5cc8-4218-be5e-a13356c21de8 @j20g2000hsi.googlegroups.com>, Ted says... What script? Robert -- Posted via a free Usenet account from http://www.teranews.com

On Dec 3, 7:34 pm, CBFalconer <cbfalco...@yahoo.com> wrote: Alright this is also the conclusion that I came to. I knew I had to use extern "C" to mix and match C and C++ but the files that it...

rickman wrote: Actually, I did several very different products with BlackFin. The most similar to what you are looking for was a handheld battery powered instrument. About 10 tasks at the same...

JeffMan <TheNewsMan4@gmail.com> wrote: This has nothing to do with comp.arch.embedded, so take your spam elsewhere. "Why do you think it's legitimate to spam irrelevant newsgroups?" might be a...

hi, i would like to know where in the Interrupt routine shall an API, RTI b serviced. how shall i determine whether the interrupt came from? also, can anyone provide code for API in sleep mode. i...

find a man at www.SexDatingPoint.com find a man looking for a woman at www.SexDatingPoint.com meet adult male at www.SexDatingPoint.com men seeking women at www.SexDatingPoint.com women seeking...

Madam/Dear Sir We are one of the largest wholesaler in China who mainly sell stylish electronic product and equipment such as Digital Cameras, Mobile Phone, Laptops, Mp4, GPS, Digital Video and bulk...

Joe G (Home) wrote: So how do you know it is the processor, and not a solder or etching bridge ? Drop the supply a little, so things do not fry, and you can do a voltage profile along the traces...

Joseph H Allen wrote: The state machine description in the spec doesn't actually show a timeout transition for the receiver, so I believe this is optional. For a transmitter, meeting the 1s rule is...

rasool wrote: First, get down from the tree and learn how to walk on the back paws. VLV

I once looked at the SAM7 parts for a project where I needed two SPI ports and very low power. I was told by the vendor that the SCC port could be used as an SPI port. Reading the data sheet does...

munnangi wrote: Ok, I think I'm starting to get it. You are creating a device that plugs into a MMC/SD/SDIO socket. I'm kinda slow. I used an LPC-2378STK dev board from www.olimex.com. The...

On Dec 5, 3:57 am, "Boudewijn Dijkstra" <boudew...@indes.com> wrote: That is irrelevant to the conversation. No one has mentioned data rates, processing power or time requirements. So there is no...

On 2007-12-05, Michael N. Moran <mnmoran@bellsouth.net> wrote: That sort of scheme is very simple to implement and the way I usually do it, the message is only "variable length" on the wire: do the...

In article <9e503ca2-8611-4d2a-8236-2006b3e014c6@a39g2000pre.googlegroups.com>, <richard.melikson@gmail.com> wrote: Original ethernet: use manchester coding. The end of the frame is indicated by...

richard.melikson@gmail.com escribió: Variable length messages that follows IEC 60875-5-2 use a header with: - The start byte (0x68) - The length byte (up to 0xFF) - The length byte repeated - The...

Yes, obviously they are flexible but for my motivation it would be good to have one architecture of die photo with big caches ;)

Hi, Dear business partners we have an urgent requirement in N.J Position Java developer JAVA DEVELOPERS:-- Title: Java Enterprise Developers Skills: Java, Java Servlets, JSP, Junit (Test First...