"mmormota" <mmormota@yahoo.com> wrote in message news:es7uu0$lpf$1@aioe.org... #define _EEDATA(N) __attribute__((space(eedata), aligned(N))) It is the alignment space being...

I succeeded controlling the 5200 the day after my post. The problem was the long time I had not dealt with JTAG, the device was getting out of "extest" when not supposed to (on my command, I had...

Eric wrote: There are a number of Arm7-based handhelds that run Linux and not just a restrictive embedded flavor like uClinux, for under $100.00 Please look into the 'zipitwireless' Yahoo group and...

On Mar 1, 1:44 pm, "wallge" <wal...@gmail.com> wrote: "PC" does not imply "desktop computer". Look at embedded PC solutions from Advantech, BCM, etc.

On Feb 13, 6:28 am, "Smeghead" <c...@ifa.hawaii.edu> wrote: Is there an adapter of some kind that's required (not included)? Have you had any luck resolving the interrupt issues? What...

mtsukanov@gmail.com wrote: That depends on the exact nature of the powerup issue - some aspects of power cycling, you cannot 'put into code'. 'blank check' (or verify, or any JTAG read ), will...

I'm planning to use National's 83848 PHY with the SAM7X256. But despite of its said to support MII interface (as SAM7X), it lacks one signal: "TX_ER". Im currently planning to enable this pin...

On Feb 28, 11:39 am, "werty" <w...@swissinfo.org> wrote: Were you quoting someone? cause your post was really unintelligible. The beginning seemed anti-headhunter while the ending seemed a...

There are lots of tricks for implementing the sigmoid including luts, and luts with interpolation between lut entries taylor series approx, CORDIC approximations. take a look at a computer...

We are using the ColdFire MCF5474 with the second internal UART connected to the second internal UART of a ColdFire MCF5232. Both UARTs are setup for RTS / CTS flow control. We are using Linux BSP...

(( ÕÜÜÜÜæÑ )) ÅíÑÇäí íÝÚá ÇáÝÇÍÔÉ ÈÇáÃØÝÇá .. ÃäÙÜÑæ ãÇ ßÇä ÌÒÇÁ ÝÚáÊå http://www.hammss.com/vb/showthread.php?p=197221#post197221

On Mar 1, 11:17 am, Al Balmer <albal...@att.net> wrote: Well, darn. Last time I was looking for a license on this product it was the normal modern "modified BSD", or at least it seemed to be.

msg schrieb: Maybe http://tm.sks-kontakt.de/index2.php?SP_ID=1&mid=1&katalog_id=27&familie_selected=94 is better. cheers Gunther

BubbaGump posted: " Basically, I think "official" "work" or "school" is overrated" Definitely. " and as usual rewards the mediocre rather than those who stand out and excel.

There are two major issues I have, perhaps they are related. I have to divide the clock by 256 (jtagclock = 8 or 9) and cut down the buffer to 512. I guess the slow jtag clock is backing up the...

On Mar 1, 12:21 am, "bujji00" <rmupp...@ati.com> wrote: Most systems have some scheme where there is a standard header at the front of the dynamically linked file/module with a table of pointers to...

Randy Howard wrote: A smiley would have reduced the impression of ridiculous bias. -- Chuck F (cbfalconer at maineline dot net) Available for consulting/temporary embedded and...

<novak.arthur@gmail.com> wrote in message news:1172688692.909688.103610@h3g2000cwc.googlegroups.com... Port A pin 4 is an open drain pin. It can be used as a general purpose input, but as an output...

Spen In one of your replies you mention that the STR9 emi address is shifte and describe how SSD 1906 A0 should be connected to 0V, etc. Could you please tell me where you found this information?...

"Pierre de Vos" <pierre.devos@webmail.co.za> wrote in message news:1172607125.501167@vasbyt.isdsl.net... A little while ago Arrow were trying to sell me a Hitachi transflective screen that was...