Hello, I have a freedom 16 mite v2 Hc16 controller working with a development board. I write to a memory addressed by CS2 and the chip select pin does not go low and as a result i am not getting an...

On 6 Feb 2007 01:02:10 -0800, "techie.embedded@gmail.com" <techie.embedded@gmail.com> wrote: The convention when writing makefiles is to define the compiler to use in the "CC" variable. i.e...

You know, when I first read your reply, I thought, that your recommendation is not the easy way to set that bit in the SD memory. I wanted to use Windows, with the SD card attached to the PC, and...

In article <1171129634.795533.325560@k78g2000cwa.googlegroups.com>, <studiescircle@yahoo.com> wrote: Please don't post this kind of stuff here any more. It's off topic and unappreciated!

I am converting a bsdl file to a private object format. The new thing this time are some entries which are fairly obvious, yet I would like some more certainty about them, if I can get it. Here is an...

"Tom" <tom8192@hotmail.com> wrote in message news:IWmzh.927812$1T2.888121@pd7urf2no... If you are using pics for work, why wouldn't you just buy a microchip icd2 and avoid hassles...

Jim Granville wrote: Worse. That is my second mistake this decade. Must be getting old. At least the correct calculation shows that the effect is trivial. It's like the federal budget, 10e3...

Tim McCaffrey <timcaffrey@aol.com> wrote: +--------------- | The fastest signaling over copper that I'm (being a software guy, and not | involved in bleeding edge hardware development) aware of (in...

Gene S. Berkowitz wrote: No problem here. If someone seems to enjoy what he is doing, he should pay for that rather then get payed :) Exactly. It can be called "union house" or "working as a...

Del Cecchi wrote: Blade servers, good point. I'll look if they have some that are 20-wide or more. -- Regards, Joerg http://www.analogconsultants.com

Vladimir Vassilevsky wrote: Before the time i have a 100 states in a state machine is look to "refactor" it into multiple interacting state machines of less than 12 states each. -- JosephKK Gegen...

Zerex71@msn.com wrote: Not normally. Some chipsets allow you to configure the chip as an RT and a monitor for test purposes or to enable loopback for testing. But in general, no. Because that is...

Vladimir Vassilevsky wrote: CodeWarrior is good and also free of charge for up to 16K. -- WBR, Yuriy. "Liberalism is a mental disorder"

"karthikbg" <karthik.balaguru@lntinfotech.com> wrote in message news:1170941245.704774.93170@p10g2000cwp.googlegroups.com... protocol stack for ethernet. You might want to look at how...

http://www.tyrell-innovations-usa.com/shack3d/productinfo/jpsBrown/jpsBrownInfo.htm http://tyrell-innovations-usa.com/shack3d/

On Feb 10, 3:13 pm, msg <msg@_cybertheque.org_> wrote: I tested putting a loop back on the TTL side of the MAX232 chip and the characters got echoed back, so it seems the problem is with the CMOS...

Hello I'm working on Xilinx virtex II Pro FPGA kit.I generated netlist for OR gate using JHDL, with a1 and a2 being inputs, and op being the output. I also created the following User constraint file:...

msg wrote: Please try this and let me know how it worked and what problems you may have had. This is sort of a 'roll your own' IDE that I use frequently and so I don't have the perspective of an...

rickman wrote: I was using the 68vz328, which is a 68k derivative, but there's no real alternative from Freescale and am quite annoyed that they end of life'd the whole 68k Dragonvball series in...

hello, i am Praveen Kumar Currently working in Embedded systems ( 8 - Bit Controllers mcs-51 core). Now i am very interested in learning RTOS. what should i do first to learn RTOS. Can you pls guide...