On Wed, 04 Oct 2006 14:32:26 -0700, in comp.arch.embedded Steve Calfee <nospamcalfee@yahoo.com> wrote: snip "Artificial Intelligunse" What ever did happen to AI?

Peter Jakacki wrote: An M68K? Neat.

On Wed, 04 Oct 2006 05:01:31 GMT, Neil <NeilKurzm@worldnet.att.net> wrote: Yes, the M/B ports have been disabled. Using the DOS remap utility after booting into DOS from a floppy works fine....

An ARM7 will not JPEG compress an 800 x 600 picture in 1 second. IIRC someone tried running an ARM7 at 10 MIPS and it took ~40 seconds to compress a 640 x 480 picture. (40,000,000 us)/ 640 /480 =>...

msg wrote: For sake of completing this thread, Its done. The device is a versatile Cirrus EP7312-based handheld with lots of possibilities. Please...

smaddy wrote: Just curious, what hardware platform are you running on? Do you have a specific buildroot for that lpc part?

murselonder wrote: 16x samplings of the subcarrier would be approx. 1msps. You need that to clock the digital PLL. It doesn't matter, you just need it to clock your logic.

Hi, I'm going to run my board with AT91RM9200. My board has 32bit SDRAM (2 x HY57V561620C) data bus width. I saw that some data lines was tied together D24 D25 and D26 (close to CPU). I reworked them...

What is the minimum distance allowed between two 802.15.4 or ZigBee devices in order to prevent any RF (near field) or collision detection circuitry/algorithm problems?

Thanks for the pointers. Let's see if I could arrange a 'scope! Meanwhile, I am checking out the display on a TV tuner card on my PC, as out here in India we use PAL system for TV. Do you think...

hi, i want to generate vxworks bsp in xilinx edk after clicking down th "generate library and bsps",the following error comes to...

hi, i want to generate bsp for vxworks in the xilinx edk after clickin down the "generate libraray ans bsps", but then a problem come up to...

"larwe" <zwsdotcom@gmail.com> wrote in message news:1147389741.824725.197170@q12g2000cwa.googlegroups.com... At the risk of revitalizing an old thread (I've been off the groups for a while): You...

In article <no.spam-6F65B0.13151103102006@news.verizon.net>, no.spam@wanted.com says... with the configuration "fuses" being set wrong in the output file. Naturally, you should check the CCS website...

I posted about this issue a year ago, just revisiting. I've been looking for the lowest power any external memory chip can dissipate per megabyte and access speed. Low power SRAM is the first...

Anyone out there with any experience? Could sure use your help.

Does anyone know where you can buy an IR receiver module molded into a cable? These are common accessories to video capture cards that you can use with an IR remote control. They have a three wire...

Paul Carpenter wrote: I can not be homework. A 16 Bit ADC is a job for a top professional. It is a non-starter for a beginner. The Same with th RC servos for a 180 degree servo that is .25...

hi Antti, unfortunately, that's one of the downsides to accepting comments instantly, without approval. you post a comment, it will be up on our blog right away! some people will spam. typepad isn't...

<ytregubov@yahoo.com> wrote in message news:1158827880.950667.134810@b28g2000cwb.googlegroups.com... the one being sold by the salesman you are currently talking to. Rufus