tusunov@my-deja.com escreveu: support, by the way) and philips. The philips option is similar to the SX2, and not to the FX2 stated by the OP. Ricardo

Mochuelo wrote: In the office, so not wildy varying. It may be good to have an external temp sensor and recalibrate... No clue. No, (I didnt do the test myself)

Download the demo version.... and that should give you some idea. "Alistair George" <noname@xtra.co.nz> wrote in message news:4495e57d@news.orcon.net.nz...

Scilent-project, A compiler for embedded usually includes a file called crt0.s (c runtime) which handles initialization and calls the main() function. It's true you will have no OS services but...

gajendraph@gmail.com wrote: You mean slow speed ADCs ? Atmel only does 500 Msample and above ;-) -- Best Regards, Ulf Samuelsson ulf@a-t-m-e-l.com This message is intended to be my own personal...

<tusunov@my-deja.com> wrote in message news:1150734201.723432.142010@h76g2000cwa.googlegroups.com... I don't see why not, you can do a lot in 10KB of code, and AppleSoft wasn't that large compared...

Hello all, Is it possible to simulate/emulate a SD card by a microcontroller/computer with a harddisk in such a way that the device doesn't notice that the SD card is missing. I have a device that...

Thanks... I just moved, installing also a new router.... I was in doubt was my fault.

Russell Wallace wrote: I'd take the paper's claims with a brick of salt: all of the results are generated by simulator. There's very little available Cell hardware or systems, unless you're lucky...

Hi, David Hearn wrote: .... just a dumb question ... did you set the ACRs accordingly ? Having the internal periphery space set to be cached is asking for trouble HTH

There are a ton of SBC's around that suit what your looking for but I don't know what you consider to be low cost. If your looking at programming in Linux, then you have the free GNU tools that will...

On Mon, 19 Jun 2006, Alistair George wrote: " it looks like the long and short answer is to stay with Hi-Tech C which is a very good package, but mine is quite old and now I check out their prices...

Hey anyone working on Tricore gcc with SIMD optimization? Or anyother related to that. Please let me know. Kumar

hi all, finally the new version of JAL is released. below the press release which contains all the links and other information. If the message below is unreadable, you can also read the press...

Hi all, Iam currently doing my final year project,porting jm10.1 code to arm7.i have cross compiled the code to arm assembly.Can any one help me in testing the code,how to give the bitstream...

tonykl@mail.ru wrote: The TACCR0 interrupt and the TACCR1 interrupt are handled differently. When you use TACCR1, the interrupt service routine should go through the TAIV vector. See SLAU144b.pdf...

On Fri, 16 Jun 2006 05:20:26 -0400, CBFalconer <cbfalconer@yahoo.com> wrote: Perhaps David would be happy if you just removed the sig separator from your netiquette block, thereby making it part of...

kkrish wrote: As a general rule of thumb, if power dissipation or physical size are important engineering criteria, x86 is practically always the wrong core for the job. The only situation where...

Port B & D I believe are part of the GPIF. Read up on those ports.. I forget what it is but I know you have to diddle something extra to actually make those ports available.. Read up on...

I'm looking for some help with an I2C problem. I am trying to write to the wiper counter register on an Intersil X9119 digipot. It works, but with a minor twist from what I would expect. The...