Hi i'm an italian boy. I had buy a FM-RXQ1-433 transciver (http://www.rfsolutions.co.uk/acatalog/DS353-9.pdf) and I would like connect a 89C51 microprocessor with pc. Is there someone which know this...

http://www.telebay.com/esolutions/opp.html

Himz wrote: The point of my earlier message was to enable you to follow proper usenet protocols, which make communication much easier. Now that you have found out how to quote with google, you...

Hi, Telecom Gaint provides innovative and customized network solutions for telecom carriers around the world. Company holds leading positions in the global market in switching, next generation...

Hi , I am loading the kernel 2.6.12 for MIPS target using vxworks boot loader. VxWorks kernel 5.5.1 image is at 0x80010000 and I have linked the linux ELF image with the same start address in...

hi all i have cross compiled a c program to arm which contains file read and write. Can any one suggest any methods to do this in assembly,ie how to give the inputs. kk

Has anybody used the Bluewater Snapper 255 ARM module or the Altera EP1C4 FGPA used on it?

CBFalconer wrote: I had used it as a reference pre-Internet. I worked for me are the time. It was the best that Barnes and Noble had. The biggest complaint is that it assumes a DOS PC. Not ANSI.

On 2006-05-18, Patrick Johnson <kirilian@bellsouth.net> wrote: Are you sure that writing to SSPBUF clears BF? I'm under the impression that happens only with a read, not a write. I would...

In Europe they are sold by the distributors, EBV,Arrow, Acte in my region. Only a few have been shipped to external customers so far. More end of May. -- Best Regards, Ulf Samuelsson This is...

Disabling the MMU on the ARM9 disables the data cache as well so running ucLinux is not "for free" either. Disabling the data cache gives a significant performance hit. Not only long accesses to RAM,...

"kdd21@hotmail.com" <kdd21@hotmail.com> writes: Zero.

There look to be pros and cons with RoHS compliant PCB options for plating and soldering I've looked into. I'm not sure how real the tin whisker problem is or if it's more of an older problem that's...

Donald, have a look at http://www.docklight.de/ They sell a tool by the name of "Docklight" which not only monitors 2 serial ports but does a huge number of things more for serial debugging....

"larwe" <zwsdotcom@gmail.com> wrote in message news:1147734611.894940.287870@i39g2000cwa.googlegroups.com... Interesting, I was offered the same position, but my reply was rather more condensed in...

Je-Rock escribió: I always recommend: http://publications.gbdirect.co.uk/c_book For embedded and not-embedded programming.

<dimithri@gmail.com> wrote in message news:1147602463.570610.199420@g10g2000cwb.googlegroups.com... Errr, why? An interrupt is generally used to signal a hardware event. At the point where you're...

I would like to develop a (portable) product that records video clips (NTSC/PAL) and replays clips through a simple GUI. In recent years i've developed mainly 8 bit embedded system. So i'm not very...

sommes schrieb: You want to read 10 Bits therefore one port is not enough (each port has 8 bits only and you use 4 by the DDRB instruction). Please send me a mail which indicates input pins and...

Markus Zingg wrote: This is all correct. And DS89C420 should not care much about 3.3V traffic if it is in idle or power down mode. Perhaps I will only have to isolate the power pins. Niels