hi i m also looking to develop some application on micro c ii . i suggest to port some protocol stack on it as it doesnot support much protocol stacks

On Fri, 12 May 2006 14:19:09 -0400, Spehro Pefhany <speffSNIP@interlogDOTyou.knowwhat> wrote: I hear they just received another 1900 of the units shortly ago -- this from a phone call I made today...

Take a look at http://www.oasis.com

Oh.. also remember not to overwrite the first 8 locations of the EEPROM inadvertantly. The FX2 reads the first byte to determine how much to offload from EEProm in order to boot. . "nappy"...

Geoffrey wrote: http://en.wikipedia.org/wiki/Cross_post. Pay special attention to the section titled "Reasons for cross-posting (as opposed to posting the same item individually to several...

dear Broeker, The small "embedded system" doesn't mean it is technically small as yo perceived. I just wanted to know the best configurations for th specifications. The "small" implies only the...

Mr. Magnus Nilsson tell me to modify the AT91RM9200-BasicUSB(CDC class) sample to Mass Storage Device class is1) Modify the USB descriptors ; 2) Implement the device specific commands (Inquiry,test...

Thanx for all your replyes. I did get it to work at least i think by once a minut give the flash and power it on and wait for its ready signal. If it doesnt come in a certain time I hardreboot it...

I have been doing some more "back of the envelope" design work on a split phase / three phase 50 Hz to 400 Hz AC power source. The comments some here have posted about ACD/DAC bandwidth have been...

Ted wrote: I use TestTrack Pro a lot, found it to be very good. Reliable, very customisable. I find the "out of the box" setup needs a bit of tweaking and has a bit of a learning curve to get the...

fishermansam@gmail.com schrieb: Maybe a digitallogic microspace pc? Have a look at http://www.digitallogic.com/english/products/mobile/mpc.asp David Schmider

<webnews1@hotmail.com> skrev i meddelandet news:1147396645.667683.55890@q12g2000cwa.googlegroups.com... You can get the Liab (www.liab.dk) CPU module which has BGA ARM9 CPU+ Flash + Ethernet PHY but...

"David Belohrad" <david.belohrad@cern.ch> skrev i meddelandet news:e3soof$fi0$1@sunnews.cern.ch... Why for sure? Core power consumption of the AT91SAM7S is about 30 mA. You have to add pwer...

khan wrote: How about 'ifconfig hdlc1 192.168.2.1'?

I have a problem using ov6620. I alway get frames consist with 4 identica pictures. My configuration of SCCB of ov6620 is COMA = 0x2c, COMB = 0x21. I tried to modify some othrer configuration, but it...

benjamin.disraeli@yahoo.com wrote: Yawn. Yet another forum place with a set of fori and one or two posts each. Why register just to have a look ? Rene

Antti wrote: Not really that constructive... Yes, it can be done. Just select the solder with most flux and for the TQFPs also use flux gel. Rene -- Ing.Buero R.Tschaggelar - http://www.ibrtses.com

Hi Jade, Just to be sure, that I understand what you are asking for: Are you looking for an instruction set simulator? Are you looking for a cycle accurate instruction set simulator? or are you...

polder_udo wrote:

Any examples of such processor that use 8 byte line size. I typically all processors using 16 or 32. I am wondering what sort of applications and area necessiate an processor with 8 byte line cache...