Microcontrollers and Source Code Archives: http://avr.x.am

Steve at fivetrees skrev: Well after investigating the problem More thoroughly i found that the MC9212NE64 board always have to retransmit, and the retransmitted packet got through. When i lowered...

hi, guys, I wrote a simulator based on simos , currently , it support two cpus,timer, duart, genbus, memory controller, dma, ether card, and it also support gdb remote debug. it can run cfe ,...

===================== RTOS - INTEGRITY Target - PowerPC 8260 Target IP Address - 10.1.1.1 Host: Microsoft IP Professional Host IP Address - 10.1.1.75 ===================== ----------------- UDP...

Uwe Bonnes wrote: was in the tgz, is now available on the page directly Heinz

Iam working as a embedded engineer in a software company and i need any information regarding any certifications worth in embedde systems from INTEL and other companies. Please inform i will be very...

Hello all, This is regarding the interface of TI C6416 Processor and the Philips Controller ISP 1582. I am new to USB Interface. I need some help regarding the programming of ISP 1582 Registers and...

Hi, I am harsha. I work on applications side. I am doing a course on Linux internals.Can any one guide me how to jump to systems/embedded systems. I am ready to take any courses if required. Thanks...

In article <p90i421kqb481687fcrf4kkt9de6s12f6v@4ax.com>, Roberto Waltman <usenet@rwaltman.net> wrote: Shouldnt be hard at all, many people are doing this now. Get a 150$ development board, grab...

Ted wrote: That's nice, but what does it have to do with what? Without context you might as well just open the window and whisper it to the squirrels. Google is NOT usenet. There is no assurance...

http://video.google.com/videoplay?docid=5125780462773187994&q=retro This may well seem very familiar to some of us - if not to us, then to our wives and partners ;). Steve http://www.fivetrees.com

"Steve at fivetrees" <steve@NOSPAMTAfivetrees.com> wrote in message news:HcSdnaHK8MjjTtXZnZ2dnUVZ8qGdnZ2d@pipex.net... Ali, you're improving, but you still aren't attibuting the quotes to those who...

The hardware is a custom made AT91RM9200 board. And yes silly me I no know it was a two fold problem, one was stray flux residue interferin with the SDRAM clock, and also misalignment errors. So if...

"Chris Hills" <chris@phaedsys.org> wrote in message news:45esdRAyHMSEFAuc@phaedsys.demon.co.uk... Yes, I saw. I quoted my Black Country friend not to add to the argument, but to show that our Black...

Hello , i managed to handle the I2C part of my project , thank all of you. But now i'm in a "strange world" full of "dtmf , pulse , dialer..." really scary , i looked at the datasheet and i dont...

I have an XSCALE IXP425 board and for some unknown reason, I have not been able to access any of the expansion bus config registers at 0xc40000xx. The registers located at 0xc000xxxx and at...

jeffm_@email.com wrote: do-it-in-software partisans (like me) chipping in. -- Tim Wescott Wescott Design Services http://www.wescottdesign.com

On Thu, 20 Apr 2006 15:16:16 +0100, "Tom Lucas" <news@REMOVEautoTOflameREPLY.clara.co.uk> wrote: You are more likely to be able to buy the Sharp parts in 5 years time. But I designed an SA1100 into...

Hello Ulf, so is not possible to drive LM4549 ac97 codec on board such 9200DK ATEB9200 by RM9200 SSC? Thanks in advance. Peter

water9580@yahoo.com wrote: Hello, I went there to check but need to register. To register I need referal name. Can you refere me/ give me a name so I can complet my registration?. I am very...