"Marian Staw" <marian.staw@wp.pl> wrote in message news:e1jhue$fcr$2@atlantis.news.tpi.pl... Have a look at the blue tooth and other wireless links from www.sparkfun.com Easy to use and not to...

Mike Gonzalez wrote: Clock a counter with the pulse, then take a periodic reading of the counter. You may have a counter on-board, or be able to get a add-on board with counter. A 16-bit...

Richard Owlett wrote: Its been sold quite a few times since 1967. http://www.samswebsite.com/about.htm -- Service to my country? Been there, Done that, and I've got my DD214 to

Zak wrote: I have an Atari 520ST sitting here for anyone who wants it. Im a c64/amiga man myself. Im in Western Australia though.... :)

hi, would anyone have a basic script that initializes the external SDRAM o the AT91RM9200-EK board? This is to be used with a JTAG emulator. Thanks, Alex

Hi, I am working on a project which is intended to overlay some parameters of interest on to a TFT-LCD display. I am using BOB-3 (basic overlay board) from decade engineering as the overlay module....

If you want a simple webserver in a box our SB72EX will do that. It can serve up webpages from on-board...

On Wed, 12 Apr 2006 10:52:51 +0200, "Lord Vain" <die@vain.com> wrote: Because this wouldn't rule out other user errors. Example: Some devices allow to switch /reset to a normale port pin, disabling...

"Pascal Garcia" <pgarcia@irisa.fr> wrote in message news:e10nld$5f4$1@amma.irisa.fr... What the datasheet is trying hard to not say is that the counter has a flaw in the design. When operating in...

Magicbox we provide embedded routerboard with ppc procesor, we provide...

jdr wrote: Typical Philips trick. The answer is never use a Philips device unless it's multi- sourced. Remember 5V Coolrunners? They also screwed up the XAG49 quite seriously, in that it was only...

yes

Richard H. wrote: We have the SOT-23. I think they are Phillips. We can send you 50 for $10, including shipping.

On Thu, 13 Apr 2006 16:38:45 +1000, Andrew M wrote: Where do you get one? The last time I checked for a constant-current diode (AKA "field-effect diode") they were about five bucks a...

Hi Tsvetan, thanks for tusunov@my-deja.com wrote: This is bad. One of my reasons to switch over to TI's MSP was the open accessible bootloader feature of the old chips. Easy to handle with my home...

The biggest issues I've had with this is board capability detection. I have some boards that are supposed to run PCI64 @ 66MHz. However, in some motherboards they are detected as 32bit wide at 66MHz...

I don't know if the size constraints can be kept up with, but I find mandriva to be the best hardware-support distro out there. Philippe chronoer wrote:

Has anybody Embedded C-coded the EDN algorithm "Take Back Half" Temperature Control by W. Stephen Woodward? I'd sure appreciate a look-see. http://www.edn.com/article/CA6255049.html?ref=nbra Once...

"jaac" <jaime.aranguren@gmail.com> skrev i meddelandet news:1144357700.726570.299560@i39g2000cwa.googlegroups.com... MHz. This is an excellent starting point for UARTs since the PC UART BAUD...

Dear all, I am hoping someone might be able to advise. (I am new to Geode) Is it possible to use the GEODE AC97 interface to playback I2S audio ? Hardware interface is very similar/same but AC97...