I'm looking for a fast processor and I like the Silicon Labs C8051F133. 100 MIPS peak 64KB flash (writable from the processor 20,000 cycle enduance) 8448 Ram The price is about right 1 -...

Hi, I used to be ported Linux without any problems so far. However, I have got a strange problem when I tried to port IEEE802.11 a/b/g PCI card. Only with ath_xxx modules I did not have any problem...

I have just started to study the AVR a week ago. The eight LEDs and registors are connected between the VCC and ATMEGA128 PORTB. I found that some CodeVision C programs does not work as I...

I have a motor that Im controlling using a micro with PWM. The pulse width Im outputting is fixed and thats good enough to make it move at a nice slow rate. However, it would be nice to sense the...

I am looking for 5 passive monochrome grapchics LCDs, with following specs: 5.7" diagonal 320x240 Operating temp 0C to 50C Viewing Angle 12 o'clock (or 6 o'clock) NO integrated controller Integrated...

hi all! thanks for your valuable replies!.Now i need clarification on CAN WAKE UP function Register. how should i use CAN WAKE UP for CAN Reception(i mean should i connect both the CAN Rx and INT...

hi all! here i am doing a project using Fujitsu controller(MB90F428).here i have a problem on CAN transmission.when i say Treq =1, the can transmits data but it does it endlessly and also the TCR...

Greetings. I'm not sure this is the appropriate forum for this query but I haven't been able to find a forum dedicated to the MSP430 port of GDB. I am using msp430-gdb GNU gdb 5.1.1 Code is compiled...

Hi everyone, I know that some ARM7 chip, such as S3C4510, can be programmed using a JTAG parallel cable without a emulator. Does anyone konw how to program AT91SAM7S64 using a JTAG parallel...

Hi all, Now we are in study phase in analyzing to identify the microcontroller which is having in-build Ethernet port, memory interface (say CF) and USB port. Now we chose AT91RM9200 tha is the...

Hi, my name's KC and I'm doing my Senior Project right now. I have to interview an expert in the field of screen printing (my topic of research) tomorrow and I'm looking for any suggestions for...

I am preparing a summary chart of most of the ARM MCUs. This is a larger task than I would like. If anyone would like to assist, visit the web site at http://www.gnuarm.com on the resources page...

Hello, I have a can ip core in verilog, I'm willing to implement it on a fpga PCI board. To do that I have to make a "PCI wishbone" but I don't know it what it consists exactly and how to do it. I...

Hi friends, i would like to compress my sound data with the help of Linear predictiv coding. i have to implement on the dsp processor tms320c6713. i do have code for generating the LPC...

Hello, Does anyone know well this modules? I would like to implement my own application on those but I have no precise information on them. Does anybody used to work with those? Do you know how to do...

Hi All, I think that when somebody is programming "driver" that means: He/She is providing function(s) call(s) for upper layer programmer use. am I right? BR /Boki.

if any question, please send mail us!!!!!! we send pcb by DHL or UPS ( Send to USA About 1 days from china) Product Name: Printed Circuit BoardPlace of Origin: ChinaFeatures: 1) Surface finish:...

Hi All, void PioSet ( uint16 mask, uint16 bits ) When the mask is true, and the bits will true, or the bits will store the Pio's input value instead of my assignment value.

Hi all, The Sydney-X2 FPGA development system for education and FPGA computer application development has now been released. http://www.burched.biz/sydneyx1.html Are you interested in developing...

Hello,, Does anybody have any experience with connecting LCD's to a Zworld embedded controller? I was looking to get a 4x20 display that will be bright enought to be read outside. Thanks Mike