Hi all I would appreciate someone who can answer some questions about OMAP MMU usage. Probably someone with knowledge about any chip with a memory management unit could answer since these are very...

I'm new to embedded programming. I've gone through the archives a bit to find answers to the questions I have, but either I'm not doing a good job of reading them or the answers just aren't present....

We apologize if this is a duplicate email. EIGHTEENTH INTERNATIONAL CONFERENCE ON SYSTEMS ENGINEERING (ICSEng05) LAS VEGAS, USA, AUGUST 16-18, 2005 (http://www.icseng.info) This series of...

We apologize if this is a duplicate email. International Conference on Computational Intelligence and Multimedia Applications, (ICCIMA) August 16-18, 2005 University of Nevada, Las Vegas,...

Hello, We are about to develop an embedded real time software to demonstrate a biomedical application. That is why we are seeking a simple CASE tool for modelling of our system using the...

Hello, I've designed a little board with a Cirrus Logic CS8900A-CQ3 ethernet controller on it, in 16-bit mode. When I connect my board to a hub, I only get a link light on my board, but not on the...

IBM, Sony and Toshiba recently gave some details about the CELL microprocessor. The microprocessor contains a power pc based core with 8 DSP type engines. More details can be found...

Hi, Is it possible to use the AVR s/w emulator on AVRStudio running on a PC and somehow get external control signals (serial or parallel port) that would correspond to signals produced by an actual...

Hi, Does anyone know if there is a users group or discussion forum exclusively for the microcontrollers mfged by ST Microelectronics. If any please let me know. Thanks Vinay

I'm drawing a bunch of waveforms using word... sufficed to say I'm just about ready to kill myself. Are there are tools for drawing waveforms precicely for documentation? Preferably open...

Hello! I just wanted to know if it is possible to access e.g. 16Mbyte SDRAM with an LPC2214 with an ARM7TDMI core? I think the necessary pins are all lined out. How to connect the RAM chip to the...

I am looking for processor/microcontrollers with instruction/data trace functionality with open source software support (as libraries maybe) to interpret this generated trace. The obvious choice I...

¼áÇ¿ ÊÇÎÞÂÛÃæÇ°ÊǸßɽ»¹ÊǺ£Ñó ¡¡¡¡¶¼ÄÜʼÖÕÖ´×ŵÄÈ¥×·ÇóÐÄÖеÄÃÎÏë~~~~~~ ¡¡¡¡I believe I can fly, I believe I can touch the...

I've been looking at various EDA tools and stumbled across Autotrax EDA, at http://autotraxeda.com. It looks interesting, but I wonder whether anyone here has any experience with it. The price is...

My Linux kernel is crashing at the point of waiting of an event. I am using wait_event_interruptible call.The messege i am getting is bad: scheduling while atomic. Could anyone please tell me why i...

I would be interested to understand the RAM needs when you have simple Ethernet applications. Is 32kB/64 kB SRAM enough for a decent application or do you need more? I think there are simple...

As anyone been able to get the MPC8272ADS board with u-boot-1.1.2 working on a 10 Mb/s hub (half-duplex)? Thanks Martin

1. Does anyone know where I can find a device driver for the DSPI MPC5554 used in SPI configuration. 2. Does anyone know how to configure the DSPI in order to serialize two channel of the ETPU Thanx...

Anyone using the Future Electronics Quadrunner part (Freescale MM908E625)? It's an HC08 with built in analog die which has 4 h-bridge outputs, originally for automotive wingmirror positioning but...

Hello out there, can anyone recommend a working disassembler for 8051 mcus that will work properly under Linux (without Wine or any other emulation)? I did only find dis51 sofar and it does not work...