Hi! Can anyone give me some links to WLAN<->serial(USB or RS232) converters, please? It may be an integrated chipset solution, an embedded board solution or even a ready device built in a case....

Hello NG, Some time ago I posted an external macro processor, Unimal, and I thought it would get the attention from embedded folks concerned with moving as much work as possible to compile time...

Hello all, If anyone knows how to setup the Target188EB board so that its I/O will b running in memory-mapped i/O mode (using hardware linker or programming) please give me some hints. Thanks, Rocky...

Teltronics, Inc. located in Sarasota, Florida, USA needs someone with embedded Linux experience, preferably on a PowerPC platform. C.a.e seems like a place with a potentially high concentration of...

Hello guys, I have asked to design a test system for an Ethernet enabled weather station. At this point, these weather stations are nothing but 2 PCs running Linux on it and they constantly read...

hi , can someone pl tell me what is the difference between an assembly directive and a pseudo-instruction ? Thanks Manan

Theres several low power GPS receivers out there (ex. Trimble's Lassen iQ), but aside from the hardwre interfacing to it what else is required? Ive never used or owned anything with GPS, just...

We are thinking of using Keil's RTXTiny for a product that will need the ability to upgrade firmware in the field. Does anyone have experience implementing ISP in this context that they'd care to...

I am just curious if anyone out there has attempted to tap into existing sensors (these are built into a industrial controller) and basically read the values in parallel without impacting the...

Please do not laugh at these newbie questions. I am looking into some sample circuit design and wants to learn how to use resistors for the following purposes: 1) pull-up/pull-down resistor for...

Hi all Is there any software available that will let me use ARM AXD debugger with a plain old Wiggler or similar home-made device? (I'm trying to debug on a device that already has a Jtag port, but...

I have a problem with vxWorks boot on my ML310. If I boot, using an ACE file with my vxworks embedded through the sysACE controller, it works say 95% of the time. If I boot, using an ACE file (same...

I'm looking to acquire a couple of Amstrad NC100s or NC150s for an embedded application. These were quite popular back home in Australia, but seem to be very thin on the ground now. I don't know if...

Does anyone have a link to information on how to integrate AVRStudio 4 and GCCAVR? I've found links on avrfreaks about AVRStudio3 and GCC, but none on AVRStudio4. I think it would help if I could...

I'm supposed to come up with a evaluation board for a 8bit processor. Over the years I have used many EVBs, including some of the classics (68000 ed. board), 6800 EVB, etc... I have also designed...

Hi all, Is anybody have experience about software implementation of MPEG-1/2 video decoding algo. My project is now to port the GNU libmpeg2 to ARM9 AT91RM9200. I think it's possible to do with...

I'm sizing up a program using RTEMS on a custom AT91RM9200 target. I'm looking for experience estimating it..how much cash it will take to tool up, how much effort to do the BSP, etc.. All insight...

Okay I'll try to keep this simple: I have a six pin ribbon cable that is 10 feet long. I am connecting 5 devices on the bus. Each device will draw <200mA @ 5-6V from the cable. I will be using a...

Hi, I was exploring the possibility of using one of the At91SAM7Sxxs. But i found that none of them has the capability of using external RAM or Flash chips. In such a case, is it possible to cram an...

I'm looking for a Transflective, Landscape, QVGA (320X240), TFT with Touch screen and LED backlight. There are a number of displays that come close (Sharp LQ036Q1DA01 (no touchscreen), Torisan/Sanyo...