Anyone ever had a problem with bistable's becoming tristable's?? I have a bistable that breaks contact if the relay next to it on the PCB operates, having gently tapped the relay the comon is not...

I read this message on fpga-group yahoo forum. Some more could enjoy this as I did, so I forward here the message. Have a look! It's a really impressive...

Partnership Opportunity Hello, I am with a manufacturer of fine jewelry and am currently looking for those interested in forming a partnership to sell jewelry on eBay or anywhere else. I work for...

Try this out, it works!!!! Turn $10 into $10,000 with PayPal, easy and quick. PLEASE TAKE A MOMENT TO READ THIS INFORMATION. THIS REALLY WORKS!!! " I WAS SHOCKED WHEN I SAW HOW MUCH MONEY CAME...

Hi, Im a senior undergrad working on a project to develop an AT91RM9200-based development board, which will be my final undergrad project. Till now, i have been working on interfacing stuff to...

Where can I get some inexpensive WiFi chips with good documentations and perhaps a development kit?

Hi, here in Germany some companys did sell the V-Gear LANDISK for around 90EUR. Its a HardDisk-Case with a 10/100MBit-Ethernet-Connecor. It has a HTTP/FTP/SMB/(S)NTP/Telnet/DHCP-Server. I think...

Partnership Opportunity Hello, I am with a manufacturer of fine jewelry and am currently looking for those interested in forming a partnership to sell jewelry on eBay or anywhere else. I work for...

Hi all, I have just began a new design around mega64 (AVR Atmel) and i spent a long day on a strange mega64 behaviour because it was shipped with mega103 compatibilty mode enable in Extended fuse...

The Keil C51/ 8051 port of Adam Dunkels' uIP v0.9 TCP/IP stack is now complete, and is available for download at... http://www.iinet.net.au/~vanluynm/ Included is the uIP web server application, as...

Hi folks, I've been using 8-bit micros (AVR) programming in assembler, but for a new project I'll be handling a fairly complex interface, and will also need to do some 26 bit math (with mult/div)...

Hello, I search a free flash programmer that can load a program into the flash of a Phytec MPC555 board via a Wiggler (Parallel port). There are 2 chips AMD AM29LV160DT. I have CodeWarrior (not...

Dear all. I tried to make a microwire controlling module in OMAP. First, I tried to change some register value to be defined in OMAP spec. I found one bit(CLK_EN) in the regiter called "setup...

I am searching for a Linux hardware (which will be used in a model airplane) with the following specs; * Small * Battery operated (single power input 5v, or 9v or 12v) * Light weight * Supports min 4...

Hi all, I'm not sure if this is the right newsgroup so if not could someone please redirect. I'm trying to find information regarding the implementation of a 10BASE-T transceiver. I have found...

Hi, I am new to nucleus RTOS. I am using nucleus PLUS 1.3 and source is already manipulated for our product development. I am trying to implement a simple UDP client and server . But i couldnt find...

Sensory, Inc., the world's leading supplier of embedded speech technologies, today announced the arrival of Adaptive Artificial Intelligence™ for the RSC-4x Family of speech processors. This...

Ok so I have a system using RH7.3 with a 2.4.18-3(RH) kernel, one 2.5 IDE hard drive, and 512 compact flash card. The hd boots fine a single master and the CF card boots fine as single master. ...

Hi everyone, Im using a custom board, with an AT91rm9200. Im am trying to load some code onto the microcontroller using the xmodem protocol, but things dont seem to be going right. I am using the...

I am told to design a generic microprocessor interface for a ASIC chip. Since I am not familiar with what types/modes of microprocessor are most popular, I don't know how generic I can reach. I am...