HEllo I made an electronic card linked with sensors. I'd like use it as a joystick. I work on Win2000, visual c++ and Windriver. At this time, the host reads my card. Device, configuration,...

Please! has anybody got microtec C compiler for z180 that hi like to trade I have a project source that was built around this compiler and i have no skills to migrate it to other compiler (although...

Hi, Is there someone who can help me to find good documents on the wishbone protocol ? Some sort of introduction... Thanks, Tom

send if you have to rombiosATacedsl.com Thanks

CALL FOR PAPERS -- ASYNC 2005 The Eleventh IEEE* International Symposium on Asynchronous Circuits and Systems March 14-16, 2005, New York City, NY, USA Venue: Columbia University The International...

I read the page about hacking the Keyspan USB-19 serial cable (http://people.omnigroup.com/wiml/soft/pic/keyspan.html). This model is no longer available but there's a USB-19HS now. Does anyone know...

Hi! We're on a new project with the golden opportunity to upgrade a system from an 8-bit 8051 to a 16-bit MPU TBD. The application is pretty straightforward bit fiddling, with a clock interrupt and...

I've got those embedded-engineer-on-a-consumer PC blues... My work desktop PC is a HP d220MT (DG266A). This has one parallel port, which is locked in ECP mode. There are no BIOS options to...

45 Ohms or 90 Ohms ? Laurent www.amontec.com

We are one of the prominent companies in Bangalore providing services in the field of Embedded Systems. We have a pool of 20 Electronics and Computer Science engineers having industry experience ....

Cannot find a datasheet for CMD's PCI-648 chip (PCI to IDE/ATA controller). Would appreciate to receive one at: wirelessATcamburyDOTcom Many thanks!

Cannot find a datasheet for the CMD PCI-648 chip (PCI to IDE/ATA controller). Would appreciate to receive one at: wirelessATcamburyDOTcom Many thanks!

I'm contemplating adding a "call-home" function to a mobile embedded system. The only data to be sent is a set of GPS coordinates and eleven bytes of status data. The easiest way I can think of doing...

Hi everybody I have a strange problem with a cypress FX2. I want to work with timers and external events on INT0 and INT1 Pin. (I want to measure the time beween an event on INT0 and...

Hi, I am trying to write a program in C language to format a Compact Flash card. I have the CompactFlash Association specification. I am unable to figure out how to read and write to the flash card...

Hello. After some research with google, I couldn't find any information (my fault probably.) I need to connect a Pentium M based board to a LCD (LVDs or conventional 18 bits interface, either is...

Hi, Can anyone recommend a nice Serial Communications Controller, in a QFP or similar package that can do HDLC at rates at least up to 1Mb/s. It also needs to be able to run from a 3.3V supply,...

I'm looking for any good advice on working with the capture/compare unit of the eZ8. (eZ8 documentation references below) The goal is to capture the time between two events (high signals). It...

Firstly, Hello to All. This is my first post on this newsgroup. I bought a DT006 "Bare board" http://www.dontronics.com/dt006.html with Atmel ATS2313-10 & a 10Mhz resonator from Dontronics.com for a...

I am attempting to setup a debug environment for a Philips LPC2124 based development board (Olimex LPC-H2124 is the board) using Arc Metadeveloper, and an Abatron BDI1000 JTAG deugger. I've been...