I found a IA1 tucked away in a corner at the local curio store/radio shack, and was toying with purchasing it. Midori and jailbait both look fairly interesting, but I don't see anything like a...

A while back I posted a question about if anyone knew of a Flash Ram IDE drive that plugs directly into the motherboard's IDE socket, without a cable (other than power). I found them, and I'm happy...

Hi, is it possible to replace a SC300 (without PCB modification) with a SC310? We are not using CGA nor PCMCIA of the SC300. Best Regards Juergen

I've been working on a multidrop serial network for home automation that runs around 19.2kbps to 56kbps, it works great, i love it, yada yada yada. But I need more speed! As the network grows to...

From the EHCI specification of Intel, it said that UHCI is also supported through "Companion Controller". Now, a question is whether a old device driver(USB 1.1) written for UHCI can be directly used...

I have need for a 32 bit free running counter, preferably with latched reads. The part (Infineon XC167) has lots of 16 bit timers and also 16 bit timers in the capture/compare units that look like...

I'm interested in attaching a low-cost IDE CDROM to an AVR board. The AVR needs to pick the tracks and control it, but it's used as an embedded CD Player for playing audio. Are there any good links...

We now know the cause of the problems with the PIC16F648A. The internal EEPROM writing procedure damages some bits in the port status register, most probably bit RP0 is affected. And seemingly...

Hello folks, I am new to MCUs and looking for a freeware HC11 C or C++ compiler. Any suggestions and pointers where I can download one? Since this is a hobby and cant invest hundreds of dollars a...

Dear Jan, thanks for your explanation, yes, indeed. ok.

Hi, Any experience here. I`m having a Cogcomp CSB337 with an Atmel AT91RM9200. The Cogcomp board ahs a pre installed bootloader, but I want to use the on chip bootloader/bootuploader. Since there...

Hi, I have connected a 16X2 LCD to my 4051 on a breadboard. The P1 is connected to the data lines of the LCD in 8 bit format. RW is grounded, RS to P3.0 and E to P3.1. I wrote a short program to...

Hi all, I'm looking at designing a weather station with a Atmel ATmega32L microcontroller. I've found temperature and humidity sensors, but haven't found anything to measure the barometric pressure....

"David R. McCoy" <david-mccoy@cfl.rr.com> writes: If the data does not change too fast, you could just store the difference between each successive sample, instead of the absolute value. How are...

You're running at 200ksps, but only storing 1k samples of each channel? Do you need to constantly update the store, ie do you store the latest 1k samples from each channel? The FTG (Flash Timing...

Martin Schoeberl wrote: Speed/package/part no ?

ROFL!

Does anybody have any idea what this connector is called and who makes it? Here's it looks like to me: http://www.uoguelph.ca/~fosterb/images/connector.jpg I've been searching digikey, however I...

None.

I'm looking for recommendations on a good eval board containing an ARM based CPU with the following qualifications: * Onboard flash nice but not necessary (256K would be good) * Onboard RAM 128K or...