V1.2.1 of FreeRTOS is now available on http://www.FreeRTOS.org. This contains a minor update which improves the context switch time by approximately 10%.

I wish to display the IP address hostname or other information on LCD panel smaller enough fitted a "front part of a floppy drive". the information is drawn from the pci databus , power and...

Hi. Anyone interested in these types of items please visit eBAY dxer114 auctions. I have too many to use for myself. Check my feedback for honesty. 100% rating. Thanks KA3FUR

Andras Tantos wrote: Welcome to usenet :-). Of course, the way to avoid topposting rants is simply to not do it, and to snip appropriately. -- Chuck F (cbfalconer@yahoo.com)...

Over the last few months I have seen a number of people say nice things about the older HP mso's such as the 1631, 52, and 16500. Where can I find specifications, features, etc. on these devices. ...

In article <7eb49faa.0308200425.5d54d8e1@posting.google.com>, Ted Wood <tedwood@ornette.freeserve.co.uk> writes PC-Lint V8 with MISRA-C checking is 145 UK Pounds (from...

100Km and a 5W total system - can you say divergence?????? 5W lasers use enormous amounts of current. I'm trying to think about the dBm that this system would require in RF too (might want to check...

Good question - line of sight is about 14 miles until you start getting into towers, curvature of the earth - that's why the old sailors had a crow's nest on top of the mast. Andrew Rene...

Mark Borgerson wrote: http://dmoz.org/Business/Telecommunications/Wireless/Equipment/Microwave/Free_Space_Optical/ I only had a quick glance, but it seems most are limited to 4000 meters. But the...

Meindert Sprang wrote: A real engineer takes 3 hours to figure out how to save 1 hour ;-) Using the 68H908 would make more sense to me too.

Meindert, I can generate PWM or Square wave from the 908, but then I will need some circuitry for speaker drive and volume control. Maybe there is a one chip solution in the form of an audio amp and...

Hi, all I am after a microprocessor for a new project. Main criteria -- must be able to run Linux (e.q. there is a Linux port for it) and have built-in Ethernet. On-chip USB (slave) is a definite...

BCM EBC-5410. 300MHz Geode, 1 PCI slot. Numerous faster CPU options should you desire them. BTW, I have a StrongARM SA1110 board with ITE PCI bridge, four PCI slots and a PCMCIA slot that I'm trying...

I don't think that any of these ( http://www.espial.com/index.php?page=comp_wins ) devices are using "Gig's of ram". -- E-mail : stoian_marius_ciprian at yahoo dot com YahooID :...

http://www.jopdesign.com/board.jsp

does any method to increase the interrupt pins on 8051? I use DS80C320 and it only has six external interrupt. -- Best Regard Danny Lu

David Evennou wrote: it anymore, somthing like ML8035 0r ML8037????,or ML3035?? not sure of the I.D. rw rw

David Evennou wrote: should be able to google for it. rw

CALL FOR PAPERS 2nd Workshop on Application Specific Processors (WASP'03) held in conjunction with The 36th International Symposium on Microarchitecture (MICRO-36) San Diego, CA, December 2, 2003