During a new development we experienced critical problems with PIC 16F648A controllers (package DIP18, date code 03142Y3). We observed two malfunctions: 1. When writing data to port A, the port...

On 21 Jul 2003 01:49:48 -0700, mathias.jaskulla@gmx.de (Mathias) wrote: There is a card called the MTV104 from http://www.ampltd.com which can take PAL or NTSC input. I dunno much about it. Same...

i used to use the at89s8252's SPI driver to develop some uC application. for lowing the production cost and the availiability. i want to use the at89c51 instead of AT89s8252. however, there are any C...

During a new development we experienced critical problems with PIC 16F648A controllers (package DIP18, date code 03142Y3). We observed two malfunctions: 1. When writing data to port A, the port...

On 16 Jul 2003 10:58:09 -0700, jhendrix@engineer.com (Jeff Hendrix) wrote: You don't say what kind of "power" is in the lines. AC 120v? DC 5 v? In any case, you will have a hard time unless you...

Anton Erasmus <junk@junk.net> wrote in message news:<v5vdhvs02v26507vc11v646pv9s5tobs34@4ax.com>... Anton, Take a look at http://www.tern.com/smartlcd_c.htm The only problems might be in the...

"iseron" <iseron@hotmail.com> wrote in message news:3F140824.90601@hotmail.com... Out of pure curiosity: why do you need RAM that small outside of your uC when you can have it inside with no...

hnooriaan@yahoo.com (hosein nooriaan) writes: I don't know about the DS80C400, but TCP normally provides flow control. That's part of the purpose of the TCP window, and it's usually transparent to...

In article <bec993c8.0307171746.2893e653@posting.google.com>, shoppa@trailing-edge.com (Tim Shoppa) wrote: Maybe convert to 400Mbps Firewire and dump the data into a Firewire RAID or a desktop...

Assalam u’Alekum all, Some of you may want to know what really happened due to which Hitlar and Germany(Nazi) earned a lot of shame. Well the plan was Hitler will kill all the Jews while everyone...

I am using the WinAVR package of GCC tools, and the COFF file it produces isn't read correctly by the AVR Studio 4.07 (known issue with AVR Studio). I am looking for the upated AVRParserCoff.dll to...

You need to think USB 2.0.... Chon Tang wrote:

Does anyone has any performance data on Wiznet W3100a ethernet chip? raw UDP or TCP FTP transfer data would be nice to see

Tim Shoppa wrote: Do a search for 'data acquisition boards". A few thousand dollar board and a spare PC should exceed your requirement. For...

I guess these are probably pretty basic questions... my sister-in-law is an EE student working on a PICMicro microcontroller project. She asked for my help with it since I've got quite a bit...

shoppa@trailing-edge.com (Tim Shoppa) wrote: I'd go for a PCI card and have it write samples through DMA directly into the PC's memory. -- Reply to nico@nctdevpuntnl (punt=.) Bedrijven en winkels...

Tim Shoppa wrote: If you don't find a better way, you might try reading it into two independent disks, staggered. Then later you fill in the drops in one of them from the other. A side benefit is...

Earlier this month, Vinh Du and Vik Sohal of LynuxWorks visited the Linux Users' Group of Davis to talk about their "BlueCat Linux" product. Presentation slides are now online, in PowerPoint...

LinuxDevices.com has just published its latest weekly Embedded Linux Newsletter, with all the latest news and info from the exciting world of Embedded Linux and Linux-based gadgets. Read it...

In article <bec993c8.0307171746.2893e653@posting.google.com>, shoppa@trailing-edge.com (Tim Shoppa) wrote: The 7/9 track digitizer I'm prototyping uses five AD9201 ten bit two channel 20mhz...