- Q: What connector is this?
- Posted by techie_alison on March 27th, 2006
Hello,
I'm like to buy some of these; http://www.retro.dial.pipex.com/2pole.jpg
That's the 2 pole version, but ideally I'd like single pole. It's 0.1"
pitch by the way just incase the image is deceptive. I know the single pole
versions exist since I've seen them on my travels. The connector is most
commonly recognised as used inside PC cases for connecting things like the
LEDs and speaker to the motherboard.
Rapid is a no-go, Maplin too, RSs site crashes, Farnell probably have them
somewhere among 13,000 results, eBay is a no-go.
Thanks again,
Aly 
- Posted by Leon on March 27th, 2006
techie_alison wrote:
I bought some 10-way ones from Farnell, IIRC. The 'official' crimp tool
is very expensive but I managed with a cheap one I got for Molex
connectors. I cut them down to make smaller ones; you might be able to
make single ones, with care.
Leon
- Posted by Gunther Mannigel on March 27th, 2006
techie_alison schrieb:
Take a look at:
http://www.Harwin.com M20-106
http://www.yamaichi.com UFS-01A-01
http://www.tyco.com AMPMODU4 No. 87456-9
Farnell.de No. 865746
FCI No. 65239
cheers
Gunther
- Posted by techie_alison on March 27th, 2006
"Gunther Mannigel" <newsgroups@mannigel.net> wrote in message
news:48qe6sFl4jplU1@individual.net...
No, thank you That's brilliant info, especially the Farnell bit to find
a direction. Determined to find the 1-way ones, I don't fancy chopping up
dozens of them for use with a logic analyser.
Thanks to Gunther and Leon,
Aly
- Posted by John Popelish on March 27th, 2006
techie_alison wrote:
If you want nice sturdy leads, you might buy them already attached to
wires from Pomona.
http://www.pomonaelectronics.com/cgi...ort=sort_field
- Posted by Vito Corti on March 28th, 2006
On 27.03.06 16:16:35 "techie_alison" <techie_alison@yahoo.co.uk> wrote:
How about
http://www.mouser.com/catalog/625/1045.pdf
Looks like they do carry the single row single position type.
Vito
- Posted by techie_alison on March 28th, 2006
"Vito Corti" <vcorti@postaccesslite.com> wrote in message
news:4428d583$1_2@news.tiscalinet.ch...
Hi Vito
That's spot on, 1-way 0.1". Postage not on the cheap side though to the UK,
about $40 or $14 will a 5 week lead time.
Had this a while back with a USA company who wanted $60 to post a 19pin
D-Type.
Aly
- Posted by Allen on March 28th, 2006
techie_alison wrote:
in the 2003/4 Book.
website www.arrowne.com
Phone number 01279 626777
- Posted by Allen on March 28th, 2006
Allen wrote:
misstyped, and forgot a 0 in the one of price.
Arrow have the FCI 65039-036. Stock number 070258X. 1+ £0.07, 50+ £0.067
- Posted by techie_alison on March 28th, 2006
"Allen" <a@b.c> wrote in message
news:44291873$0$3637$ed2e19e4@ptn-nntp-reader04.plus.net...
Was gonna say 70p for a 1-way.
Checking out now .....sent them an email.
Brill
Aly
- Posted by John B on March 28th, 2006
techie_alison scrobe on the papyrus:
Hi Aly,
I spent several days looking for just such a connector about a year
ago. No luck, so I ended up buying enclosed crimp terminals from RS
(233-0022 or 233-0033 depending on your wire diameter) and a length of
3mm adhesive lined heatshrink sleeving (RS:157-3789). It works a treat.
--
John B
- Posted by techie_alison on March 28th, 2006
"John B" <spamj_baraclough@blockerzetnet.co.uk> wrote in message
news:48t39nFkvhh4U1@individual.net...
Hi John,
Yeah, whizzed through here as a lightbulb moment earlier. Sounds like quite
a good idea actually. Don't have to be quite so critical in keeping the
solder perfect on the crimp either.
Definitely going to look into that
Thanks,
Aly
- Posted by Anthony Fremont on March 28th, 2006
"techie_alison" <techie_alison@yahoo.co.uk> wrote in message
news:wbmdndtQ17zKibTZRVnyrg@bt.com...
Just by a couple of the crimp tools and it'll make that shipping look
like pocket change. Do people really pay $650.00 for a crimp tool?
- Posted by Jim Stewart on March 28th, 2006
Anthony Fremont wrote:
In the aerospace and power industries, that
and a lot more....
- Posted by beef@dogod.com on March 29th, 2006
On 27 Mar 2006 07:02:13 -0800, "Leon" <leon.heller@bulldoghome.com>
wrote:
If you can find the base connector you can make singles with heat
shrink tubing over the raw female part of the connector.
*** Free account sponsored by SecureIX.com ***
*** Encrypt your Internet usage with a free VPN account from http://www.SecureIX.com ***
- Posted by Richard Harris on March 31st, 2006
hmm I got me a crimp tool that can do two size terminals and it cost £20,
and it works very well, very solid built to.
From : http://www.rapidelectronics.co.uk
Hehee
"Anthony Fremont" <spam@anywhere.com> wrote in message
news:%NjWf.34614$1Z5.31517@tornado.texas.rr.com...
- Posted by Leon on March 31st, 2006
Richard Harris wrote:
I use one of those as well. 8-)
Leon
