- Can't Figure this one out
- Posted by Emmett on January 29th, 2006
I am trying to install windows xp pro on Dell Inspiron 7000. First, during
"copying set up files" it can't find several dll files all beginning with
usrxxx. Then the install will get to 4th step and will lock up when
"installing devices" bar is about 55% complete. It does the exact same thing
on 2 different xp cd's! I posted message before when I had tried first cd
and someone replied start in safe mode. It did start in safe mode but came
up with message something like windows cannot continue installing in safe
mode. That is when I decided it may be a windows cd problem and tried new
(different) cd. New cd did exactly same thing as first cd.
Does anybody have any ideas?
- Posted by Dave Patrick on January 29th, 2006
To do a clean install, boot the Windows XP install CD-Rom. Setup inspects
your computer's hardware configuration and then begins to install the Setup
and driver files. When the Windows XP Professional screen appears, press
ENTER to set up Windows XP Professional.
Read the license agreement, and then press the F8 key to accept the terms of
the license agreement and continue the installation.
When the Windows XP Professional Setup screen appears, all the existing
partitions and the unpartitioned spaces are listed for each physical hard
disk. Use the ARROW keys to select the partitions Press D to delete an
existing partition, If you press D to delete an existing partition, you must
then press L (or press ENTER, and then press L if it is the System
partition) to confirm that you want to delete the partition. Repeat this
step for each of the existing partitions When all the partitions are deleted
press F3 to exit setup, (to avoid unexpected drive letter assignments with
your new install) then restart the pc then when you get to this point in
setup again select the unpartitioned space, and then press C to create a new
partition and specify the size (if required). Windows will by default use
all available space.
Be sure to apply SP2 or at least these two below to your new install before
connecting to any network.
http://www.microsoft.com/downloads/d...displaylang=en
http://www.microsoft.com/technet/sec.../MS03-043.mspx
http://www.microsoft.com/technet/sec.../MS03-049.mspx
--
Regards,
Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect
"Emmett" wrote:
|I am trying to install windows xp pro on Dell Inspiron 7000. First, during
| "copying set up files" it can't find several dll files all beginning with
| usrxxx. Then the install will get to 4th step and will lock up when
| "installing devices" bar is about 55% complete. It does the exact same
thing
| on 2 different xp cd's! I posted message before when I had tried first cd
| and someone replied start in safe mode. It did start in safe mode but
came
| up with message something like windows cannot continue installing in safe
| mode. That is when I decided it may be a windows cd problem and tried new
| (different) cd. New cd did exactly same thing as first cd.
| Does anybody have any ideas?
- Posted by Happy w/Microsoft :) on January 29th, 2006
Here's something else to try. I've had the hang up at "Starting Windows
Setup" screen and the "Installing Devices" screen. I've eliminated the
hang-up and had successful install with this:
Boot from CD, when the screen displays 'Press F6 if you need to install a
third party SCSI or RAID driver' press F5 instead. After a short delay, you
have a screen that allows you to select the Hardware Abstraction Layer. The
details of that proceedure are here:
http://support.microsoft.com/?kbid=299340
"Dave Patrick" wrote:
- Posted by Emmett on January 29th, 2006
I just got done trying first suggestion got exact same results! Guess I'll
try next suggestion but thanks anyway Dave for suggestion.
"Happy w/Microsoft
" wrote:
- Posted by Dave Patrick on January 29th, 2006
Try removing non-compliant (non-essential) hardware and try again.
--
Regards,
Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect
"Emmett" wrote:
|I just got done trying first suggestion got exact same results! Guess I'll
| try next suggestion but thanks anyway Dave for suggestion.
- Posted by Emmett on January 30th, 2006
Hey Dave - OK, I'm not a beginner, but ... since it's a laptop, how do I do
what your are suggesting?
"Emmett" wrote:
- Posted by Dave Patrick on January 30th, 2006
I'm not sure how old this unit would be but check the dell web site for
compatible Windows XP bios and drivers.
--
Regards,
Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect
"Emmett" wrote:
| Hey Dave - OK, I'm not a beginner, but ... since it's a laptop, how do I
do
| what your are suggesting?
|
| "Emmett" wrote:
|
| > I am trying to install windows xp pro on Dell Inspiron 7000. First,
during
| > "copying set up files" it can't find several dll files all beginning
with
| > usrxxx. Then the install will get to 4th step and will lock up when
| > "installing devices" bar is about 55% complete. It does the exact same
thing
| > on 2 different xp cd's! I posted message before when I had tried first
cd
| > and someone replied start in safe mode. It did start in safe mode but
came
| > up with message something like windows cannot continue installing in
safe
| > mode. That is when I decided it may be a windows cd problem and tried
new
| > (different) cd. New cd did exactly same thing as first cd.
| > Does anybody have any ideas?
- Posted by Emmett on January 30th, 2006
Good idea - I'll check that next, thanks for help.
PS. I can see windows install locking up over bios issue or driver, or
several other things, but I sure would like to know why, when copying files
in set up it looks for and can't find the several usrxxxxx.dlll files!
"Dave Patrick" wrote:
- Posted by Dave Patrick on January 30th, 2006
The CD-Rom drive may have failed.
--
Regards,
Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect
"Emmett" wrote:
| Good idea - I'll check that next, thanks for help.
| PS. I can see windows install locking up over bios issue or driver, or
| several other things, but I sure would like to know why, when copying
files
| in set up it looks for and can't find the several usrxxxxx.dlll files
- Posted by Emmett on January 30th, 2006
Cdrom's ok - I think. I just realized this is PII, however I found flash
bios upgrade for xp and dell inspiron 7000 on dell site and i ran it, trying
to see what happens now.
"Dave Patrick" wrote:
- Posted by Dave Patrick on January 30th, 2006
OK, good luck.
--
Regards,
Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect
"Emmett" wrote:
| Cdrom's ok - I think. I just realized this is PII, however I found flash
| bios upgrade for xp and dell inspiron 7000 on dell site and i ran it,
trying
| to see what happens now.
- Posted by Peter Foldes on January 30th, 2006
Since it is a P2 and you seem to be getting stuck with the usrxxx files, I would suggest that you either remove or disconnect you very old US Robotics modem which possibly dates back to the mid 90,s. Try installing the OS without any USR(US Robotics Product)
--
Peter
Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.
"Emmett" <Emmett@discussions.microsoft.com> wrote in message news:E64EDEE4-3989-496C-8873-5F170FCB6CDF@microsoft.com...
- Posted by Emmett on January 30th, 2006
Hey Pete thanks for the info
Dave - if your still around, looks like bios upgrade did the trick! I am
downloading updates right now. I could kick myself for not thinking of this
hours ago so I really appreciate you getting me on track. I know it's an old
unit but I wanted to get it running and give it to my wife so I could get her
off my pc! It runs internet explorer and that's all she needs - now if i can
keep the bugs, spyware and adware of it, we will both be happy. Thanks again
to you and all the "good guys" the make this community great.
John
john.carroll@removethiscdctek.com
"Dave Patrick" wrote:
- Posted by Dave Patrick on January 30th, 2006
Glad to hear it. You're welcome.
--
Regards,
Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect
"Emmett" wrote:
| Hey Pete thanks for the info
| Dave - if your still around, looks like bios upgrade did the trick! I am
| downloading updates right now. I could kick myself for not thinking of
this
| hours ago so I really appreciate you getting me on track. I know it's an
old
| unit but I wanted to get it running and give it to my wife so I could get
her
| off my pc! It runs internet explorer and that's all she needs - now if i
can
| keep the bugs, spyware and adware of it, we will both be happy. Thanks
again
| to you and all the "good guys" the make this community great.
| John
| john.carroll@removethiscdctek.com