I'd like to move from cable to DSL because my cable company hasn't
been responsive to the poor service. Will my home network have issues
in the transfer? I'm currently using a Motorola WR850g wireless router
and WPC1810g wireless NICs. Usually have 3 to 4 machines hooked to my
wireless network at once. Anyone have thoughts? thanks

jcage wrote:
As long as your DSL prrovider will allow the use of third party routers -
you won't even notice there was a change other than possible speed
differences. All the Cable or DSL company does is provide your router with
a connection to the Internet - you are connecting to said router (wired or
wirelessly) and the traffic is being (not ironically so) routed to and from
the Internet using the router.

--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html

jcage@lycos.com wrote:
You may need to provide your DSL service your user name and password to
use DSL.


--
http://www.bootdisk.com/

jcage@lycos.com wrote:
You will most likely have to reconfigure the router's WAN connection
parameters. Many cable ISPs just require the connection to accept an
automatically assigned IP address from the ISP's DHCP server.
Typically, this is the default on most home routers. Many ISPs use
PPPoE for DSL, which requires a login userid/password combination. Your
router can easily handle this. See your User Guide.

Other than the connection between your router and the ISP-supplied modem
(you'll switch from a cable modem to a DSL modem), there should be no
effect on your home network.

--
Lem -- MS-MVP

To the moon and back with 2K words of RAM and 36K words of ROM.
http://en.wikipedia.org/wiki/Apollo_Guidance_Computer
http://history.nasa.gov/afj/compessay.htm

On Sun, 30 Mar 2008 19:53:11 -0700 (PDT), jcage@lycos.com wrote:

This is more of a networking question than XP, but frankly the OS
doesn't care WHAT type of broadband connection you have.

jcage@lycos.com wrote:
The very fact that you have a home router will make your transition
extremely seamless. The only difference that will need to be done is to
reconfigure your home router's WAN connection so that it logs in to the
new DSL connection rather than from the old cable connection. Typically,
in a DSL connection, your new ISP will send all of that login
information in the kit that they send to you with the new modem.

Yousuf Khan

jcage@lycos.com wrote:
I switched from cable to DSL to FiOS. Verizon provided a replacement
modem for DSL and then a router for FiOS. Not quite seamless in
changeover, but I now have three computers and my DirecTV receiver
hooked up to my router -- the computers are wireless, the receiver is wired.

Bill

On Tue, 01 Apr 2008 10:45:52 -0700, Bill Sharpe
<wfsnopam@adelphia.net> wrote:

I dumped Comcast ($87 a month) and switched to AT&T Fastaccess Lite
for $20 a month. Comcast charges $40 for installation, and the AT&T
installation (self-install) was free. The cost difference is huge,
shop around. I still use my 8-port Ethernet switch (hub) for the
LAN. The DSL modem plugs into the uplink port of the switch. Or, you
can use a crossover cable instead of the uplink port. With this
configuration there is no proxy PC and any computer can connect.

Phisherman <noone@nobody.com> wrote:

I dumped AT&T AND my land-line phone service and picked up Comcast
Internet - 4 times faster than my DSL with AT&T - for a total savings
of almost $30/mo

My Comcast service was also self-install, and free.