If using Windows, the command string #vgr=x can be entered in the
Extras field in DUN. The AT and the <cr> are assumed.
If not familiar with Windows DUN, see:
http://modemsite.com/56k/connectoid.asp



Pete wrote:
--
(remove N0SPAM from address to reply)

According the the user guide at
http://www.usr.com/support/5625/5625...nkg-Manual.pdf
this model supports 2 NVRAM templates using the Yn, &Wn and Zn commands

&Wn Writes current configuration to NVRAM templates
&W0 Modifies the NVRAM 0 template (Y0)
&W1 Modifies the NVRAM 1 template (Y1)Z Resets modem

Yn Selects power-on/reset default configuration
Y0 Use profile 0 setting in NVRAM
Y1 Use profile 1 setting in NVRAM
Y2 Use factory configuration 0 (&F0)
Y3 Use factory configuration 1 (&F1)
Y4 Use factory configuration 2 (&F2)


Zn Resets modem
Z0 Resets modem to NVRAM profile selected by Y
command
Z1 Resets modem to NVRAM profile 0
Z2 Resets modem to NVRAM profile 1
Z3 Resets modem to factory default profile 0 (&F0)
Z4 Resets modem to factory default profile 1 (&F1)
Z5 Resets modem to factory default profile 2 (&F2)

BTW I did not see #vgr listed as a command for this model (??)


Pete wrote:

--
(remove N0SPAM from address to reply)

The Yn command does not use the &