Hi I've got my hands on a used 3com wireless lan access point 2000 (3CRWE20096A ), but the power supply is missing. The backside of the unit or the manual does not state the voltage of the PSU, so...

Hi, Just curious as to whether this can be done. Here goes: I have a wired network with an SMB four port router and a Linksys 802.11b WAP in one room of my house. My main Internet connection is...

I recently put together a new box including the ASUS A7V600 motherboard and the Seagate SATA hard drive. The power adapter cable had to be ordered from afar. Spent too much on shipping and...

Hi, Just got a Buffalo WBR-G54 (ver 1.2 firmware) and set the application to config the netmeeting and see the Wan ip but afterward still can see the global ip in the netmeeting any idea pls...

I have a Belkin 4 Port DSL Router which I have been using for months. I upgraded the firmware when I first got it and have not been to the setup screen since. I thought it was time to update the...

Yes, you are, you god damn mother fucker. "John Smith" <john@gandalf.ukshells.co.uk> wrote in message news:%Ao8b.4552$fR4.1417@newsfep3-gui.server.ntli.net...

Hello, I have an ADSL modem connected to a NIC. Sometimes I lose line sync and have found I may have a faulty RJ-45 connection. When I push the cable into the NIC I get my sync back but my (USB)...

I'd like to experiment with Gigabit, and the NICs are almost in range pricewise, but switches are still pretty expensive. Will Gigabit work with a crossover cable like 10/100?

I have an odd problem and I'm hoping for some advice on solving it. I have wireless internet service with a static IP address. I purchased a Linksys firewall/router (BEFSX41), which ATM I have only...

I have a Promise TX2000 RAID array (two 120gig WD drives in RAID1) and want to move the array to a newer machine i just built. is it possible to do this without rebuilding the array? by that I mean...

Hi, There's a Revision C of this router (http://www.dlink.com/products/support.asp?pid=63#firmware) but no vendors (Newegg, Googlegear, TigerDirect) I've contacted can guarantee I'll get this latest...

Forgot to mention that he's running Windows XP Home. Jhumbo wrote: My brother has had a wireless network set up between his Sony Vaio laptop and his DSL connection using 2Wire equipment. All was...

Hi all, Building a new house and builder says he runs CAT5 instead of Bell Wire (phone) and that I should be able to change faceplates and use other 6 wires for CAT5. 1. Doesn't phone need solid...

Does anyone know if it is possable to duplicate the network setting of one machine onto another machine and what the easiest way to do this would be? Any help would be greatly appreciated. Jason

In my work I have experienced that some NICs don't work with some network switches and I can't figure out why. I am especially having trouble with computers where the NICs are integrated in the...

Hi, Does Linksys Instant Wireless PCI Adapter Card work with any other vendors PC Card Wireless Network Cards? I have some Cicso Aironet 350 PC Cards and I am looking for a cheap way to get them to...

What is the remote wake up on my PC setup menu and how to use it. I have a LAN of PCs and can I remote turn one on with this feature after it goes standby?

Nice try, now try something intelligent.