Just starting out with a brand new Canon Pixma ip4500 in the UK and as
this is my first Canon printer
I have a couple of questions which are not answered in the manual.

1. I have been printing full colour A4 borderless prints which look very
good.
So far I have printed 19 sheets and the ink monitor is now showing
less than full
on two of the tanks. The monitor seems to go down in steps rather
than a gradual motion.
Are these steps quarters or thirds of the total amount of ink in the
cartridge or how many steps
are there before the cartridge is empty ?

2. Turning my attention to the purchase of replacement ink cartridges
here in the UK,
the options seem to be:

A Original Canon product at £8 to £10 each

B Cartridge World product with reset chips at £5 to £6 each.

C Compatible product to which I add the existing chips at £3 each.


I understand that options A and B should work with no problems.
If I select option C, I understand that I will lose the ink monitor
function.
Is this loss of function permanent and irreversible or will the use of
a full price Canon
product after the use of a compatible restore the ink monitor function ?

All helpful comments gratefully received with thanks in advance. The
resident troll can
save himself the effort of replying as his message is always boringly
the same.

John Chapman

John Chapman wrote:
If a new original cartridge is mounted, ink level monitoring is restored
for that one.
Replace original cartridges only when it refuses to print due an
completely empty cartridge.
Replace catridges without ink monitoring immediately when printing is
flawed, otherwise you risk damaging the printhead.

A lot of info is available at http://www.nifty-stuff.com
Cli8 stuf can be found a.o. via
http://www.nifty-stuff.com/forum/sea...h_id=229533640

--
Have fun, Bert

Dana 24.03.2008. 21:48, John Chapman lupi chelom po tipkovnici i nastade
slijedeci tekst:

cartridges are tramsparent, so you can compare real level and level on
monitor.

in some cases, when cartridge is near empty (einoguh ink for colouring
"walls" of cartridge), if you put chip on full one, ink monitor will
restore level...
when you put original, or reset (somewhere) chip, ink monitor will work
normally...
within first 2-3 sets of colours, you will learn to aproximate ink level
(if you use C option), so there will be no need for "eye-checking"
levels...


--
I am Locutus of Borg,
Your life as it has been is over,
From this time forward,
You will service... US!

John Chapman wrote:
engineers. Anything less and you will not longer have a real Canon
printer but some hybrid
resist fading and is patented. There is no substitute just a bunch of
claim by vendors who sell who knows what mainly from china like the dog
food and toothpaste along with leaded paint.
be traced as the cause for ruining the printer Canon does not have to
fix it under the warranty.
unless you print a great deal you will have a higher propensity to clog
the print head.
itself but you never know just how much your print head has been
compromised and if you are getting all of the quality you paid for.

OpaPiloot wrote:

John Chapman wrote:



Just starting out with a brand new Canon Pixma ip4500 in the UK and as this is my first Canon printer I have a couple of questions which are not answered in the manual. 1. I have been printing full colour A4 borderless prints which look very good. So far I have printed 19 sheets and the ink monitor is now showing less than full on two of the tanks. The monitor seems to go down in steps rather than a gradual motion. Are these steps quarters or thirds of the total amount of ink in the cartridge or how many steps are there before the cartridge is empty ? 2. Turning my attention to the purchase of replacement ink cartridges here in the UK, the options seem to be: A Original Canon product at £8 to £10 each B Cartridge World product with reset chips at £5 to £6 each. C Compatible product to which I add the existing chips at £3 each. I understand that options A and B should work with no problems. If I select option C, I understand that I will lose the ink monitor function. Is this loss of function permanent and irreversible or will the use of a full price Canon product after the use of a compatible restore the ink monitor function ? All helpful comments gratefully received with thanks in advance. The resident troll can save himself the effort of replying as his message is always boringly the same. John Chapman



If a new original cartridge is mounted, ink level monitoring is restored for that one. Replace original cartridges only when it refuses to print due an completely empty cartridge. Replace catridges without ink monitoring immediately when printing is flawed, otherwise you risk damaging the printhead. A lot of info is available at http://www.nifty-stuff.com

This is the refillers cult.

snip

measekite, the complete idiot wrote:

....nothing of any importance. Just his usual lies.
Frank