- Epson 785 EPX printing 6x4 photos from computer
- Posted by Alan Browne on August 31st, 2003
Plugged in tested, etc.
Tried printing a 600 dpi scan to it from photoshop. Mis aligned and
wrong size. So...
Tried printing the same photo fromt the Epson Software (Film Factory)
and ended up with a nearly correct print, but one edge printed off of
the paper (about 1/4 inch worth). The other edges (3) have a 1/4 inch
border.
Paper was loaded in portrait orientation, the Film Factor software
showed in portrait orientation for printing (image is landscape
oriented, but not an issue); and with a border.
Thoughts anyone?
Thanks,
Alan
- Posted by Alan Browne on September 3rd, 2003
Safetymom123 wrote:
As I said below, only one edge printed over.
The prview on the screen shows the entire image inside the border.
- Posted by Safetymom123 on September 4th, 2003
You still don't say if you checked the box for borderless. Are you picking
the right paper type? 4x6 no perforations.
"Alan Browne" <alan.browne@videotron.canospam> wrote in message
news:3F563D82.6080708@videotron.canospam...
- Posted by Alan Browne on September 5th, 2003
Got it now. Thanks.
Safetymom123 wrote:
- Posted by Alan Browne on September 5th, 2003
Got it all sorted out. Thanks for your help.
Cheers,
Alan
Safetymom123 wrote:
