I've got some major problem with my printer...Al the leds are flashing. I
have already cleaned the ink drain pads in the bottom of the printer, but
the leds are still flashing. I need the code to reset the drain ink pad
counter . Is there somebody who knows the button combination for it...
Thanks.
Frank.

Vanden Bussche Francky wrote:

1. Turn printer off.
2. Disconnect printer from computer.
3. With printer turned off, hold down both the Paper and the Cleaning
buttons.
4. Continue to hold the buttons and turn the printer on.
5. When the Paper light starts to flash, release both buttons.
6. Immediately press the Cleaning button and hold it down for at least
10 seconds (until all the lights begin to flash and the printer will
begin to reset).
7. When the Power light is steady, the printer should work.

"Vanden Bussche Francky" <f-v-b@skynet.be> wrote in message
news:40431423$0$783$ba620e4c@news.skynet.be...
Try this
1. Turn printer off.
2. Disconnect printer from computer.
3. With printer turned off, hold down both the Paper and the Cleaning
buttons.
4. Continue to hold the buttons and turn the printer on.
5. When the Paper light starts to flash, release both buttons.
6. Immediately press the Cleaning button and hold it down for at least 10
seconds (until all the lights begin to flash and the printer will begin to
reset).
7. When the Power light is steady, the printer should work.
8. It might be a good idea to check the waste ink tray and if necessary
replace the waste ink pad.

I can't remember where this came from - but someone posted it yonks ago.
Tony
--
Inkylink JetTec UK Quality - Wot others wanna-be
Epson C64/ C84 Lighfast (30% more free) pigmented inks.
Canon BCI-3 i560 i750 BCI-6 i865 S-820 / S-900 series.
www.inkylink.co.uk
remove pants for personal mail