My question is I want to store the printer for about 8 months.Can the
carts be taken out and the heads be cleaned like it was when it was new.
I just use the printer for printing cds/dvds.I really like this printer
for printing on cds it does a great job.If anyone knows how to clean the
heads so it wont clog please post.
John.H.

Buy a set of cleaning carts and do a couple of cleans then run a purge sheet
with all the colours, run a nozzel check and store the printer with the
cleaning carts in the printer, when you come back to it run the same again.

"John H." <J.H.@noSpaM.com> wrote in message
news:7zQ8f.234$qk4.80@bgtnsc05-news.ops.worldnet.att.net...

Thanks Shooter for the info.
John.H.

Shooter wrote:

I don't agree with Shooter's suggestion. Just do a nozzle check, be sure
that all nozzles are printing, and then turn off the printer. You can store
the printer for 8 months.
I have seen a printer stored this way and after 5 months it worked again
without any cleaning cycle.


--
Yianni
in@mailbox9.gr (remove number nine to reply)


--
"John H." <J.H.@noSpaM.com> wrote in message
news:rBS8f.548$qk4.0@bgtnsc05-news.ops.worldnet.att.net...

Shooter wrote:

rm

On Sat, 29 Oct 2005 23:18:49 +0000, Shooter wrote:

Considering the depreciation on cheap inkjets and that there'll almost
definitely be a better one around in 8 months time it might be better just
to sell it and then buy a new one rather than take the risk that it won't
work after 8 months of storage.

--
Dave
Beauty is in the eye of the beerholder

Thanks for the info.The cleaning carts cost about as much as the printer
So I will try what you said.I have'nt had a clog with this printer yet.
John.H.

Yianni wrote:

Yianni wrote:

I don't think that is completely correct. I do know of a 1290 that was
used sparingly and after a or more month of not being even switched on
the nozzles were clogged when they tried to use the printer again. (And
it was on OEM inks for the clowns benefit.) Shooters suggestion has been
the most realistic that I have seen recommended. Oh BTW I do think
storage temperature has something to do with it as well.

rm

DaveG <dave-ng@nospam.tld> wrote in
news:%hW8f.140411$G8.98359@text.news.blueyonder.co .uk:

Or, buy a brand new 200 with a full set of full size carts from Sam's for
about $72 and put it in a closet along with the old one. If the old one
doesn't work in 8 months, use the new one instead. Given that $72 is about
the price of the carts alone [only $12 above Sam's discount price for a set
of carts], what's the risk? I suspect a replacement CD carrier would cost
that much.

I get them from www.valueshop.co.uk at £2.99 each.


"Rob" <mesa@mine.com> wrote in message news:dk16p4$ld2$1@nnrp.waia.asn.au...

SamSez wrote:

Shooter wrote:

It's a somewhat involved process. It requires making or buying some
cleaning cartridges and flushing out the ink in the heads completely.

If this won't work for you, package the printer in a large sealed
plastic bag. Place a small container next to the printer (inside the
bag also) into which you have placed a small sponge that is wetted down
with water, and place it in the open container, to maintain the humidity
level in and around the printer.

Art

John H. wrote:

I have refilled hundred of cartridges till now, I have had many epson
printers till now, I have never seen anything like that. I used to store an
older epson 1160 printer for four months, then put out of the box, I printed
some pages and then I restored into the box for another four months. Even in
the Greek summer it didn't develop any clog... Exceptions are the printers
that use pigment inks.


--
Yianni
in@mailbox9.gr (remove number nine to reply)


--
"Rob" <mesa@mine.com> wrote in message news:dk1bei$n5p$1@nnrp.waia.asn.au...