- Epson R210/R310 USB2
- Posted by Cocoboy on April 26th, 2004
Hi All
Will I have any troubles printing if my laptop is not USB2.0 compatible?
Thanks
a.
- Posted by Povl H. Pedersen on April 26th, 2004
In article <408d1f9d$0$27647$61ce578d@news.syd.swiftdsl.com.a u>, Cocoboy wrote:
Yes. My Windows box complains that I am using a Hi-Speed device in a low-speed
USB hub.
- Posted by Safetymom123 on April 26th, 2004
Other than getting that error message you won't have a problem. I do it all
the time with no problems.
"Povl H. Pedersen" <povlhp@povl-h-pedersens-computer.local> wrote in message
news:slrnc8qvhr.332.povlhp@povl-h-pedersens-computer.local...
- Posted by Yianni on April 26th, 2004
Windows complaints, but it is working! This is just a warning message. USB2
is compatible to USB2 devices.
--
Yianni
in@mailbox9.gr (αφαιρέστε τον αριθμό εννιά από το email)
--
"Povl H. Pedersen" <povlhp@povl-h-pedersens-computer.local> wrote in message
news:slrnc8qvhr.332.povlhp@povl-h-pedersens-computer.local...
- Posted by Cocoboy on April 26th, 2004
Povl H. Pedersen wrote:
but you can still use the printer?
- Posted by Si on April 26th, 2004
"Cocoboy" <cocoboy@swiftdsl.com.au> wrote in message
news:408d8e9f$0$27648$61ce578d@news.syd.swiftdsl.c om.au...
Yes.
I should of course point out that the R210 is USB1.1 anyway.
The R310 is USB 2.0...
Si.
- Posted by Cocoboy on April 27th, 2004
Si wrote:
Thanks Si,
I hadnt noticed that... that should be cool then as I am probably gonna
go the 210 as I dont need all the extra stuff on the 310.
Thanks again
a.
- Posted by Povl H. Pedersen on April 27th, 2004
In article <408d8e9f$0$27648$61ce578d@news.syd.swiftdsl.com.a u>, Cocoboy wrote:
Yes, and cardreader and scanner.
- Posted by Cocoboy on April 29th, 2004
Povl H. Pedersen wrote:
FYI - I am using USB1.1 with the R210 ( which is USB2 according to the
doco ) and it works fine and no warnings whatsoever.
Thanks to all
a.
- Posted by Si on April 29th, 2004
"Cocoboy" <cocoboy@swiftdsl.com.au> wrote in message
news:c6pqp0$cjf$1@spacebar.ucc.usyd.edu.au...
Looking here:
http://www.epson.com.au/products/hom...sphotor210.asp
It says that the R210 is 1.1....
Which agrees with the fact that my UK model R200 is also 1.1.
Epson in the US also state that it's 1.1...
However, here:
http://www.epson.com.au/
Epson show the R210 with a USB Hi-Speed logo...which disagrees with the
actual page about the printer itself.
What gives? Seems Epson AU can't even agree with themselves.
Si.
- Posted by Cocoboy on April 29th, 2004
Si wrote:
Yeah I found other sites that listed the 210 as USB2 as well.
a.
