- Hp Laserjet 6L multiple paper feed?
- Posted by Ken Collings on June 18th, 2004
I have a Hp Laserjet 6L which is feeding multiple pages. Is there an easy fix I have
been told that it is a common problem with this model. I have searched HP site for
a fix but no luck. Is their a fix available in the UK.
Many thanks
--
Ken Collings
- Posted by budgie on June 19th, 2004
On Fri, 18 Jun 2004 09:57:52 +0100, Ken Collings <ken@elvet.plus.com> wrote:
Have a look through google groups (on this group) for 5L and feed. Plenty of
history as well as debate about the HP free fix vs the proper fix.
Also look at www.fixyourownprinter.com for a DIY kit which I have used and
recommend.
- Posted by Bob on June 19th, 2004
"Ken Collings" <ken@elvet.plus.com> wrote in message
news:GlwD5CAQ6q0AFw5x@elvet.plus.com...
HP was offering a free "separation pad" fix for the 5L and 6L.
Better is to replace the pickup roller and separation pad. Kits
should be available from HP or others.
Bob
- Posted by Larry on June 19th, 2004
Welcome to the hell known as the LaserJet 6L. Mine, from the day it was
bought new, was named "Jam-O-Matic" on the network.
There was at one time a free fix from HP for this, but a better one can be
purchased from www.fixyourownprinter.com for about $30 (if I remember
correctly).
Note that none of the above ever fixed the crooked-feeding issue I have had
since day 1.
-Larry
"Ken Collings" <ken@elvet.plus.com> wrote in message
news:GlwD5CAQ6q0AFw5x@elvet.plus.com...
- Posted by bill brown on June 22nd, 2004
We found a simple solution to the crooked printing problem. Just make sure
the paper guides are snug up against the sides of the unprinted paper. We
had to tape ours down to keep them from moving outward.
We have been running 8 printers everyday in a business and the only
problem we have is having to replace the feed pad and rollers about every
year or two. We buy them a half dozen at a time and also recharge our own
cartridges. www.fixyourownprinter.com is the recommended supplier.
-bill
"Larry" <none@none.com> wrote in message
news:EaQAc.3871$rf7.1946@lakeread02...
- Posted by Larry on June 24th, 2004
I actually tried that, but thanks!
-Larry
"bill brown" <bill@squires.com> wrote in message
news:1087873818.108813@gaspra.spiretech.com...
- Posted by fred smith on July 4th, 2004
I don't know if HP still offers the repair kit for this model , it is
some industrial tape that fits the page sepatator
Ken Collings wrote:
