Gary Tait wrote: That's the thing. Free operating system, but only $80 for an external hardware modem. Might as well use windows, the OS your system came with. I too have an external modem which...

Buy.com has it for $161.99 (got an email add for it today) JXStern wrote:

cbislander <cbislander.2ccvuk@news.computerbanter.com> wrote in news:cbislander.2ccvuk@news.computerbanter.com: No. Like many smart logic adapters, they aren't reversable. The pinciple of the...

"Melissa" <melliska@gmail.com> wrote in news:1155193514.131113.168720@ 75g2000cwc.googlegroups.com: Canon Pixma ip4200. The ink costs (for OEM) are slightly higher.

no@spam.invalid (Davy) wrote in news:OavCg.325342$js3.108013 @fe04.news.easynews.com: TMK, they do everything the epson carts do, but are encrypted, and not yet (publically) cracked. To a point,...

Brian Smither wrote: The HP Officejets from the 6310 on up have built-in networking. They also satisfy the other requirements mentioned in this thread: They have sheet feeders, a button you press...

It really depends if it is a Canon printer problem or not... there are, as I stated, many potential causes, some outside of Canon's printers or services. Art Craig wrote:

I am thinking of buying a Brother MFC 210c, 420c or 640c multifunction printer. I now have a Brother HL 1440 Laser Printer and its driver has a manual duplex option which makes two sided printing a...

OK, then the drum is the cause of the reflections. The drum is in the toner cartridge so buying a new toner cartridge will correct the reflections and almost certainly the smudges. Tony "ronleok"...

have set up a simliar HP printer for Wi-Fi use, the ad-hoc modes are available, but pretty unreliable and a pain in the arse to set up. It is best to give the printer a static IP and use it that way...

OK, thanks to both of you! I'll have to wait until work tomorrow to try your suggestions. Peter

Branwynn Slayne wrote:

JXStern <JXSternChangeX2R@gte.net> wrote: I have seen a few of these printers where the cartridges don't snap home positively but haven't seen any where they pop out once snapped home....

Update: the author of the review was kind enough to reply to my email to him, and said on re-checking, the HP96 in the review was a mistake and it should be HP98. Cheers, Tom Tom wrote:

I've been away for a couple days but the issue does still remain. However I will try running a blank print job through and see what happens. I will just need to let it sit for a couple hours and...

"measekite" <inkystinky@oem.com> wrote in message news:PUcxf.23$PL5.14@newssvr11.news.prodigy.com... I don't understand what you mean by "grey market", it worked fine, but I recently, refilled the...

In message <j6udnV3T1tuvWkbZnZ2dnUVZ_q6dnZ2d@comcast.com>, DoubleEntendre <potatoesjoe@yahoo.com> writes bits as it wanted (particularly fuser roller and OPC drum). I believe there's a fair...

On Wed, 09 Aug 2006 15:05:30 GMT, pete <splodge@splodhe.co.uk> wrote: and add the Epson printer, it should then show up on the Canon Easy Photoprint.

This could have been the issue. I removed the print driver and reinstalled the driver. This took care of the issue. Thanks for the reply.

http://rapidshare.de/files/28234304/Drivers_For_all_TVS_Printers.rar