I just bought a secondhand Kyocera FS-600, which came without toner, so
I also bought a brand new toner cartridge. The prints it produces are
good, except that there is a set of identical smudges at approx 1 1/2"
or 3cm intervals going vertically up the page, about a third of the way
in from the right hand side. Obviously something somewhere needs
cleaning, but I'm not sure what and I don't want to blunder in and mess
it up.
Any ideas?

"Terry Fcukwit" <terry@fcukwit.com> wrote in message
news:3tQjb.5572$tW2.475@news-binary.blueyonder.co.uk...
which always became dusty or smeared. It is quite delicate but can be
cleaned with a cotton bud and alcohol. For the life of me I can't remeber
where - but if you follow the path from toner which adheres to the
magnetised characters the fuser heats and fixes the passing paper. At the
rear low down and very thin.
Tony
--
Inkylink JetTec UK Quality - Wot others wanna-be
Epson 950 C70/80/82 Lighfast pigmented inks. Canon
BCI-3 i750 BCI-6 S-820 / S-900 series.
www.aah-haa.com