Hi all,
-----------------

last week we switched our CA due to technical problems and those of
interoperability from
openSCEP to Windows 2000 CertServices. ( internal CA. ) For testing
purposes, I cleared
the existing old CA cfg from a 803 and enrolled with the new one, everything
went fine until I wrote to cfg to mem:
( The RA's Certs are of a 512 length, so are my pubkeys. )

22:51:10: %SYS-3-CONFIG_NO_PRIVATE: No space remaining to save private
config

After reboot, parts of the cfg are truncated ( ISAKMP authen / id parms )
and my
private keys are gone ( ! ) so I am unable to SSH to it.

Here's the sho conf, service compress-config is active. Doesn't look like a
NVRAM issue ?!

Using 7387 out of 8037 bytes, uncompressed size = 13810 bytes
Uncompressed configuration from 7387 bytes to 13810 bytes

Ay ideas what must be done ? Perhaps adding DRAM ?

Here's the sho ver:

System returned to ROM by power-on
System restarted at 16:43:50 UTC Fri May 14 2004
System image file is "flash:c800-k9osy6-mw"

Cisco C803 (MPC850) processor (revision 1) with 54532K bytes of virtual
memory.
Processor board ID JAD04140JQ7 (374384480)
CPU part number 0x2101
X.25 software, Version 3.0.0.
Bridging software.
Basic Rate ISDN software, Version 1.1.
2 POTS Ports
1 Ethernet/IEEE 802.3 interface(s)
1 ISDN Basic Rate interface(s)
12M bytes of physical memory (DRAM)
8K bytes of non-volatile configuration memory
8M bytes of flash on board (4M from flash card)
Configuration register is 0x2101



greets Daniel