I have been working on a particular bothersome problem for about a month now
and I don't think I have come any closer to solving the problem...

My 1605R is the standard Eth0 / Eth1 setup, no wic in the expansion slot, I
have it setup per Cisco's site (and by every other example I have ever seen)
to connect the correct way. I know the config works because the router ran
for 80 days before I moved and had my ADSL service setup at my new house.

Since moving the router will not setup a PPPoE connection to my ISP
(Earthlink, in Greenville, SC) - their tech support will not support
anything out of the bounds of have you rebooted your modem, etc. so I do not
know what else to try, here is my current running config :

gnvlsc-01-gw001#sh conf
Using 2594 out of 7506 bytes
!
version 12.2
no parser cache
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
no service dhcp
!
hostname gnvlsc-01-gw001
!
logging rate-limit console 10 except errors
enable secret OMITTED
!
clock timezone EST -5
clock summer-time EDT recurring
ip subnet-zero
ip name-server 207.217.126.81
ip name-server 207.217.77.82
ip name-server 207.217.120.83
ip name-server 64.89.70.2
ip name-server 64.89.74.2
!
ip cef
no ip dhcp-client network-discovery
vpdn enable
!
vpdn-group 1
request-dialin
protocol pppoe
!
!
!
!
interface Ethernet0
description OMITTED
no ip address
no ip mroute-cache
pppoe enable
pppoe-client dial-pool-number 1
!
interface Ethernet1
description OMITTED
ip address 10.0.0.1 255.255.255.0
ip nat inside
no ip mroute-cache
!
interface Dialer1
description Earthlink.net ADSL
ip address negotiated
ip mtu 1492
ip nat outside
encapsulation ppp
no ip mroute-cache
dialer pool 1
dialer-group 1
ppp pap sent-username OMITTED password OMITTED
!
ip nat inside source list 10 interface Dialer1 overload
ip nat inside source static udp 10.0.0.10 4000 interface Dialer1 4000
ip nat inside source static tcp 10.0.0.10 4000 interface Dialer1 4000
ip nat inside source static udp 10.0.0.10 7777 interface Dialer1 7777
ip nat inside source static udp 10.0.0.10 7778 interface Dialer1 7778
ip nat inside source static udp 10.0.0.10 7779 interface Dialer1 7779
ip nat inside source static udp 10.0.0.10 7780 interface Dialer1 7780
ip nat inside source static udp 10.0.0.10 7781 interface Dialer1 7781
ip nat inside source static udp 10.0.0.10 27500 interface Dialer1 27500
ip nat inside source static udp 10.0.0.10 27900 interface Dialer1 27900
ip nat inside source static tcp 10.0.0.10 5800 interface Dialer1 5800
ip nat inside source static udp 10.0.0.10 5800 interface Dialer1 5800
ip nat inside source static udp 10.0.0.10 5900 interface Dialer1 5900
ip nat inside source static tcp 10.0.0.10 5900 interface Dialer1 5900
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
no ip http server
!
access-list 10 permit 10.0.0.0 0.255.255.255
!
line con 0
password OMITTED
login
line vty 0 4
password OMITTED
login
!
ntp clock-period 17042334
ntp server 64.89.70.2 prefer
ntp server 64.89.74.2
end

I have run IOS 12.1(3)XG6 which worked but crashed every 3 - 4 days so I
ended up settling on 12.2(2)T4 which ran for 80 days before I packed up and
moved on...

The Cisco has not yet come up at the new house, ELNK says I am connection
through a new kind of DSLAM but the Linksys BEFSR41 router and my Windows XP
box can establish the PPPoE connection no problem, ELNK recommends I install
the newest IOS...

I have now tried as of this evening 12.3(1a), 12.3(1), and 12.2(15)T5, all
of which give me the same result... I have tried running both the IP PLUS
and IP/FW PLUS IPSEC 56 feature sets if this matters...

I have tried PPPoE debugging but I'm not 100% sure what kind of failures I'm
supposed to be looking for, since everything worked fine until the move I
don't think its going to help for me to just keep randomly changing things
so I figure its worth asking to see if anyone else has had a similar
experience...

Thanks!

--
Hugh William Collier-Byrd
--
Amethyst Networks
Websites, Networking, Design, & More!
http://amninc.net/

Everything looks okay to me except I have the following under my int
d1.

"ppp authentication pap callin"

AND I have this in the global config mode. Try permitting IP traffic
and see how it goes.

"dialer-list 1 protocol ip permit"

hktco

"Hugh William Collier-Byrd" <amethyst1x@earthlink.net> wrote in message news:<1hrRa.36$jN2.32@newsread1.news.atl.earthlink .net>...

Did not work...:-(

I did capture some PPPoE debugging information, here are the packets :

00:03:49: %DIALER-6-UNBIND: Interface Vi1 unbound from profile Di1
00:03:49: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down
00:04:09: PPPoE 0: I PADO R:0003.4be3.9482 L:00d0.58a4.4480 Et0
00 D0 58 A4 44 80 00 03 4B E3 94 82 88 63 11 07
00 00 00 1B 01 01 00 00 01 02 00 0B 67 6E 76 6C ...
00:04:11: PPPoE 1999: I PADS R:0003.4be3.9482 L:00d0.58a4.4480 Et0
00 D0 58 A4 44 80 00 03 4B E3 94 82 88 63 11 65
07 CF 00 1B 01 01 00 00 01 02 00 0B 67 6E 76 6C ...
00:04:12: IN PADS from PPPoE Session
00:04:12: %DIALER-6-BIND: Interface Vi1 bound to profile Di1
00:04:12: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
00:04:12: PPPoE 1999: I PADT R:0003.4be3.9482 L:00d0.58a4.4480 Et0
00 D0 58 A4 44 80 00 03 4B E3 94 82 88 63 11 A7
07 CF 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...
00:04:12: %DIALER-6-UNBIND: Interface Vi1 unbound from profile Di1
00:04:12: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down
00:04:32: PPPoE 0: I PADO R:0003.4be3.9482 L:00d0.58a4.4480 Et0
00 D0 58 A4 44 80 00 03 4B E3 94 82 88 63 11 07
00 00 00 1B 01 01 00 00 01 02 00 0B 67 6E 76 6C ...
00:04:34: PPPoE 2000: I PADS R:0003.4be3.9482 L:00d0.58a4.4480 Et0
00 D0 58 A4 44 80 00 03 4B E3 94 82 88 63 11 65
07 D0 00 1B 01 01 00 00 01 02 00 0B 67 6E 76 6C ...
00:04:34: IN PADS from PPPoE Session
00:04:34: %DIALER-6-BIND: Interface Vi1 bound to profile Di1
00:04:34: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
00:04:34: PPPoE 2000: I PADT R:0003.4be3.9482 L:00d0.58a4.4480 Et0
00 D0 58 A4 44 80 00 03 4B E3 94 82 88 63 11 A7
07 D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...

--
Hugh William Collier-Byrd
--
Amethyst Networks
Websites, Networking, Design, & More!
http://amninc.net/

"hktco" <dwhkt@hotmail.com> wrote in message
news:dcdc4935.0307170638.52c21786@posting.google.c om...

I just figured it out...

NEW CONFIG :

gnvlsc-hh-gw001#sh run
Building configuration...

Current configuration : 2595 bytes
!
version 12.3
no parser cache
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
no service dhcp
!
hostname gnvlsc-hh-gw001
!
enable secret 5 OMITTED
!
clock timezone EST -5
clock summer-time EDT recurring
ip subnet-zero
ip name-server 207.217.126.81
ip name-server 207.217.77.82
ip name-server 207.217.120.83
ip name-server 64.89.70.2
ip name-server 64.89.74.2
!
ip cef
vpdn enable
!
vpdn-group 1
request-dialin
protocol pppoe
!
!
!
!
interface Ethernet0
description OMITTED
no ip address
no ip mroute-cache
pppoe enable
pppoe-client dial-pool-number 1
!
interface Ethernet1
description OMITTED
ip address 10.0.0.1 255.255.255.0
ip nat inside
no ip mroute-cache
!
interface Dialer1
description Earthlink.net ADSL
ip address negotiated
ip mtu 1492
ip nat outside
encapsulation ppp
no ip mroute-cache
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname OMITTED@earthlink.net
ppp chap password OMITTED
ppp pap sent-username OMITTED@earthlink.net password OMITTED
!
ip nat inside source list 10 interface Dialer1 overload
ip nat inside source static tcp 10.0.0.10 5900 interface Dialer1 5900
ip nat inside source static udp 10.0.0.10 5900 interface Dialer1 5900
ip nat inside source static udp 10.0.0.10 5800 interface Dialer1 5800
ip nat inside source static tcp 10.0.0.10 5800 interface Dialer1 5800
ip nat inside source static udp 10.0.0.10 27900 interface Dialer1 27900
ip nat inside source static udp 10.0.0.10 27500 interface Dialer1 27500
ip nat inside source static udp 10.0.0.10 7781 interface Dialer1 7781
ip nat inside source static udp 10.0.0.10 7780 interface Dialer1 7780
ip nat inside source static udp 10.0.0.10 7779 interface Dialer1 7779
ip nat inside source static udp 10.0.0.10 7778 interface Dialer1 7778
ip nat inside source static udp 10.0.0.10 7777 interface Dialer1 7777
ip nat inside source static tcp 10.0.0.10 4000 interface Dialer1 4000
ip nat inside source static udp 10.0.0.10 4000 interface Dialer1 4000
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
no ip http server
!
!
access-list 10 permit 10.0.0.0 0.255.255.255
!
line con 0
password OMITTED
login
line vty 0 4
password OMITTED
login
!
ntp clock-period 17042334
ntp server 64.89.70.2 prefer
ntp server 64.89.74.2
!
end

Anyhow, what I finally did was ?'ed in debug long enough until I saw I could
turn on low level packet debugging for PPP and see everything that was going
back on forth from my router and the access concentrator...

Even though ELNK says they use PAP authentication it looks like on these new
loops we have a little PAP and CHAP. Check out my pre-fix logging :

01:05:16: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down
01:05:16: Vi1 EVT: Cstate 0 0x00000000
01:05:16: Vi1 EVT: Free PPP 0 0x00000000
01:05:40: %DIALER-6-BIND: Interface Vi1 bound to profile Di1
01:05:40: EVT: Setup 0 0x00000000
01:05:40: Vi1 EVT: Setup 0 0x00000000
01:05:40: Vi1 PPP: Using dialer call direction
01:05:40: Vi1 PPP: Treating connection as a callout
01:05:40: Vi1 PPP: Authorization required
01:05:40: Vi1 PPP: No remote authentication for call-out
01:05:40: Vi1 LCP: O CONFREQ [Closed] id 1 len 10
01:05:40: Vi1 LCP: MagicNumber 0xD094C373 (0x0506D094C373)
01:05:40: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
01:05:40: Vi1 EVT: Cstate 4 0x00000000
01:05:40: Vi1 PPP: I pkt type 0xC021, datagramsize 21 link[ppp]
01:05:40: Vi1 PPP: I pkt type 0xC021, datagramsize 12 link[ppp]
01:05:40: Vi1 EVT: Packet 0 0x02DC930C
01:05:40: Vi1 LCP: I CONFREQ [REQsent] id 74 len 19
01:05:40: Vi1 LCP: MagicNumber 0x7AD49965 (0x05067AD49965)
01:05:40: Vi1 LCP: MRU 1500 (0x010405DC)
01:05:40: Vi1 LCP: AuthProto CHAP (0x0305C22305)
01:05:40: Vi1 LCP: O CONFACK [REQsent] id 74 len 19
01:05:40: Vi1 LCP: MagicNumber 0x7AD49965 (0x05067AD49965)
01:05:40: Vi1 LCP: MRU 1500 (0x010405DC)
01:05:40: Vi1 LCP: AuthProto CHAP (0x0305C22305)
01:05:40: Vi1 EVT: Packet 0 0x02DCAA4C
01:05:40: Vi1 LCP: I CONFACK [ACKsent] id 1 len 10
01:05:40: Vi1 LCP: MagicNumber 0xD094C373 (0x0506D094C373)
01:05:40: Vi1 PPP: No authorization without authentication
01:05:40: Vi1 PPP: I pkt type 0xC223, datagramsize 34 link[ppp]
01:05:40: Vi1 EVT: Auth Packet 0 0x02DCC18C
01:05:40: Vi1 CHAP: I CHALLENGE id 1 len 32 from "gnvlscdt72w"
01:05:40: Vi1 CHAP: Unable to authenticate for peer
01:05:40: Vi1 LCP: O TERMREQ [Open] id 2 len 4
01:05:40: Vi1 PPP: I pkt type 0xC021, datagramsize 6 link[ppp]
01:05:40: %DIALER-6-UNBIND: Interface Vi1 unbound from profile Di1
01:05:40: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to down

---

Anyhow if you look through you will see the Access Concentrator at
gnvlscdt72w, Greenville, SC Dial & Toll CO, request CHAP authentication
which per ELNK it should not request at all.. Well I turned on CHAP and then
the debug logs showed something was trying to authenticate me for PAP so I
turned on CHAP and PAP and it worked fine and the problem was with
authentication believe it or not, I suppose my Linksys router and Windows XP
box are smart enough to reply for both without explicitly being told to do
so...

--
Hugh William Collier-Byrd
--
Amethyst Networks
Websites, Networking, Design, & More!
http://amninc.net/