Hi all,

I am having problems accessing a network via ISDN dial-in


Cisco 2611
+------------------------+ Gateway: 10.1.1.1
PC -------( ISDN )-------| BRI0/0 Eth0/0 |------( LAN )------
+------------------------+ 10.1.1.x
192.168.1.1 10.1.1.2
pool:
192.168.1.3
- 192.168.1.4


I can dial in, get a ip (e.g.192.168.1.3), i can ping to
192.168.1.3 (my computer)
192.168.1.1 (cisco router)
10.1.1.2 (Ethernet Card)

but that´s it! I can´t reach e.g. 10.1.1.1 and other PCs in the LAN.
What am I doing wrong? please help!

Rainer


----[sh run]--------------------------------

version 12.2
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Cisco2600
!
enable secret <>
enable password <>
!
username xxx password <>
ip subnet-zero
!
!
no ip domain-lookup
!
isdn switch-type basic-net3
!
interface FastEthernet0/0
description connected to EthernetLAN
ip address 10.1.1.2 255.0.0.0
speed auto
full-duplex
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface BRI1/0
description connected to Dial-inPCs(ISDN)
no ip address
encapsulation ppp
dialer rotary-group 1
dialer-group 1
isdn switch-type basic-net3
no cdp enable
!
interface BRI1/1
no ip address
shutdown
isdn switch-type basic-net3
!
interface BRI1/2
no ip address
shutdown
isdn switch-type basic-net3
!
interface BRI1/3
no ip address
shutdown
isdn switch-type basic-net3
!
interface Dialer1
description connected to Dial-inPCs(ISDN)
ip address 192.168.1.1 255.255.255.0
encapsulation ppp
no ip split-horizon
dialer in-band
dialer-group 1
peer default ip address pool Cisco2600-Group-1
no cdp enable
ppp authentication chap pap callin
ppp multilink
!
router rip
version 2
network 10.0.0.0
network 192.168.1.0
no auto-summary
!
ip local pool Cisco2600-Group-1 192.168.1.3 192.168.1.4
ip classless
no ip http server
ip pim bidir-enable
!
!
dialer-list 1 protocol ip permit
snmp-server community public RO
!
line con 0
exec-timeout 0 0
password <>
login
line aux 0
line vty 0 4
password <>
login
!
end
!

"Rainer" <R.Hohn@t-offline.at> wrote in message news:<bf6bue$it4$1@news.fth.sbs.de>...
Because you want 10.1.1.2 255.255.255.0 instead ?

well, I had to add
route add 192.168.1.0 mask 255.255.255.0 10.1.1.2
for each pc on startup.

are ther better ways doing so?
Rainer

Hi Hans,

I do know the task of a default gatway, but as I have to integrate the
router into an already existing LAN, where I don´t have access to the
clients standard gateway settings (there I could have integrated my
router...) But in this case, I will have to include some batch for all the
clients...

But whe the client doesn´t have a default gateway, will it find my remote
dial-in computers IP address? (just wondering)

Rainer

Hi Laurent,

I changed this already; but the problem was, that the pc inside the LAN
didn´t know where to respond, as the default gateway didnt´t know my new
router. So in order to fix this without touching the standard gateway (I
don´t even know if there will be one...), I have to add a static route for
all clients.

regards,
Rainer