Can someone help me to make an "access-group" command that will allow all
the services specified in "sbs2003" object-group to be open?
Is my access-list command correct???

I want to forward those service-ports to my mail/web server on the inside -
192.168.1.1

Thanks.


Note: xxx.xxx.xxx.xxx is public IP.

PIX Version 6.3(4)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password Y7EKFZ/WwxR3Oz37 encrypted
passwd Y7EKFZ/WwxR3Oz37 encrypted
hostname pix-sf
domain-name secret.local
clock timezone PST -8
clock summer-time PDT recurring
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
no fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
no names
name 192.168.3.0 NYOffice
name 192.168.1.0 SFOffice
name 192.168.1.1 server1
object-group service SBS2003 tcp
port-object eq 4125
port-object eq www
port-object eq 3389
port-object eq 444
port-object eq https
port-object eq smtp
access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0
192.168
..3.0 255.255.255.0
access-list outside_cryptomap_20 permit ip 192.168.1.0 255.255.255.0
192.168.3.0
255.255.255.0
access-list outside_access_in permit tcp interface outside object-group
SBS2003
host xxx.xxx.xxx.xxx object-group SBS2003
pager lines 200
mtu outside 1500
mtu inside 1500
ip address outside xxx.xxx.xxx.xxx 255.255.255.248
ip address inside 192.168.1.254 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location 192.168.3.0 255.255.255.0 outside
pdm location 192.168.1.1 255.255.255.255 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp interface smtp 192.168.1.1 smtp netmask
255.255.255.
255 0 0
route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx (ISP gateway) 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225
1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
ntp server 192.168.1.254 source inside prefer
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
tftp-server inside 192.168.1.1 /pix
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto map outside_map 20 ipsec-isakmp
crypto map outside_map 20 match address outside_cryptomap_20
crypto map outside_map 20 set peer 67.102.218.146
crypto map outside_map 20 set transform-set ESP-3DES-MD5
crypto map outside_map interface outside
isakmp enable outside
isakmp key ******** address zzz.zzz.zzz.zzz netmask 255.255.255.255 no-xauth
no-c
onfig-mode
isakmp nat-traversal 20
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption 3des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 60
ssh 0.0.0.0 0.0.0.0 outside
ssh xxx.xxx.xxx.xxx 255.255.255.255 outside
ssh 192.168.1.0 255.255.255.0 inside
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 30
management-access inside
console timeout 0
dhcpd address 192.168.1.2-192.168.1.129 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
terminal width 80
Cryptochecksum:1f3cfd9bf54c9d4d3afaeb11fbf3aef6
: end

In article <WMnwf.7354$JT.1324@fed1read06>,
Ian McKellan <chimp98@hotmail.com> wrote:
:Can someone help me to make an "access-group" command that will allow all
:the services specified in "sbs2003" object-group to be open?
:Is my access-list command correct???

Change those to

access-list outside_access_in permit tcp any interface outside object-group SBS2003
access-list sbs2003_static_acl permit tcp host 192.168.1.1 any
static (inside,outside) interface access-list sbs2003_static_acl

The way you had the ACL configured would have been for the case
(impossible without spoofing) where the outside interface IP was the
source and the public IP xxx.xxx.xxx.xxx was the destination, and both the
source -and- destination ports were chosen from the SBS2003 object
(e.g., source port 4125, destination port smtp.)

Your static was along the right lines, but you had only static'd
the one port and needed to static the others as well. As you already
had constructed the SBS2003 object it was easier to use that in a
"policy static" than to put together a bunch of individual 'static'
statements.


Not much point concealing zzz.zzz.zzz.zzz when you left it visible in your
'set peer' statatement ;-)

again ?
I replied this the same Q in your other tread:
Open up ssh for remote access on PIX 501

9th jan ...



please read that first



"Ian McKellan" <chimp98@hotmail.com> wrote in message
news:WMnwf.7354$JT.1324@fed1read06...

"Martin Bilgrav" <bilgravCUTTHISOUT@image.dk> wrote in message
news:y9Pwf.4382$Cl2.103986@news000.worldonline.dk. ..
IP:

object-group service SBS2003 tcp
port-object eq 4125
port-object eq www
port-object eq 3389
port-object eq 444
port-object eq https
port-object eq smtp
no access-list outside_access_in
access-list outside_access_in permit tcp any interface outside object-group
SBS2003
access-group outside_access_in in interface outside



sho access-list outside_access_in should then give this result:

access-list outside_access_in; 6 elements
access-list outside_access_in line 1 permit tcp any interface outside
object-group SBS2003
access-list outside_access_in line 1 permit tcp any interface outside eq
4125 (hitcnt=0)
access-list outside_access_in line 1 permit tcp any interface outside eq www
(hitcnt=0)
access-list outside_access_in line 1 permit tcp any interface outside eq
3389 (hitcnt=0)
access-list outside_access_in line 1 permit tcp any interface outside eq 444
(hitcnt=0)
access-list outside_access_in line 1 permit tcp any interface outside eq
https (hitcnt=0)
access-list outside_access_in line 1 permit tcp any interface outside eq
smtp (hitcnt=0)