http://www.cisco.com/en/US/products/hw/routers/ps221/prod_configuration_basics09186a00801a055a.html try the link above, you need assign IP on VLAN instead of...

I'm about to start an evaluation of ACS 3.2. The primary roll of ACS will be to provide single sign on to the network devices. I figure that will be simple enough, I've just got to upgrade a few...

Where is the price listings of the Cisco IOS'es ?? Can some one give me the price ranges.

hi I just got a catalyst 2100 it has a serial port on the rear to connect it to my workstation but it did not come with a cable and I am wanting to know if I can use a straight db9f/db9f or if I need...

VG200 working OK with callmanager ver 3.1. Installed callmanager 3.3 and now gateway not working. Any clues? Config printout available if required. Any assistance will be gratefully...

Hello I'm having trouble connecting to a Cisco VPN from behind a back-to-back ISA/PIX firewall. I've read all the documentation on ISA for doing this and I've enabled NAT-T on my PIX as well as...

Hallo, i have a cisco 831.The problem is,the Virtual-Access1 Interface takes nearly 10 minutes,till it changed state to up and i have connection to the ISP. Any ideas ?

---on first, sory my language--- I will be change my wireless base I want bay Aironet 4800 but I don't now whether 4800 like AP will work good with Linksys WAP11 like APC anyone testing this pair...

I know, I know. This has been covered again and again, but I'm still unsure . . . and having trouble. I did the usual: I bought a used 827 from you-know-where. It's supposed to work. It lights up...

I got a 1900 from ebay and I'm trying to access the console port. It's sending a bunch of AT commands like it wants to talk to a modem. How can I default the config so it won't do that. I cannot...

Hi, am having problems connecting a modem to the Aux port of the G1 - seems only to be with this Processor card, as have no problems with console ports on other NPE/NSE cards, RJ45 or 25pin... have...

Hi all, does anyone know if cisco produce a pocketPC verision of the Cisco VPN client software like Checkpoint do for theres? Many Thanks

Hi, I am trying to figure out if there is anything special one has to do on a cisco router to allow DHCP relay. I am trying to get an IP address from a DHCP server which is located on another...

Hello, Is there a mib field(s) that indicates the current power, or status of device (on/off) in the Cisco mibs? I specifically am asking for the status/power of the Cisco 3725 Router, Cisco 3750...

Can any one send me v12.2 IOS for a cisco 2503?? I have 16meg of ram Do I need 16 meg of flash ram to run v12.2

Hi, I'm trying to copy a ios image using ftp instead of tftp , ftp comes up with this warning " this is not a valid executable for this system" closing. How do I accomplish a ios transfer using ftp...

--- Russian security Web site SecurityLab is reporting that the source code for Cisco Systems Inc.'s main networking device operating system was stolen on Thursday. According to the report, criminal...

Hi, Has anyone had success with installing a ADSL Wic into either a 3640 or a 2610, I can't seem to get either of the routers to recognize it. I've tried a couple of different ios, still no...

If I want to forward this range of ports (6881-6999) to a host on the inside of my pix (10.1.150.104), would this statement cover it? access-list 100 permit tcp host any host 10.1.150.104 eq...

Hello all, We are migrating from TACACS+ based Server to RADIUS based Server. We are doing extended authentication on PIX firewalls for outbound connections using TACACS+. Is there anyone aware of...