I'm having a problem with outgoing SMTP hanging. I can see the initial handshake occuring but after I get an ACK from the remote server, there's a pause of about 1 to 2 minutes before I get the...

Hello, I need to configure a serial port on a Cisco 2610 with dce-terminal-timing-enable command, but this command is not recognized .... any idea ? You will find below a sh ver of the router...

Hi, I'm trying to implement a blackhole route server with our ISP. We currently running BGP, and we are getting full and default routes from ISP. I understand what it does, but I'm not really sure...

http://www.complete-answers.com/

"MrPaul" <pwthoma@philzy.com> wrote in message news:3jiub0dl9jf3vurmr7939p33iim42qdli3@4ax.com... Error Message %RSP-6-TXSTUCK : Txacc of Interface is at % of its txlimit Explanation The...

Does Cisco have a SONET / SDH solution that will take a SONET concatenated STS-12C input and talk SDH AU4 Concatenated on the line side? If 15454 or other Cisco boxes can bridge these two, what are...

I am trying to browse to a shared folder on our server running Windows 2003 Std edition over a dial-up Cisco VPN Client link without success !! The vpn client is running windows 2000 sp4 and is a...

I want do configure a VPN-Tunnel with a Cisco VPN-Client 3.6 for windows and an IOS-Router.My router has two interfaces,one for the WAN an one for LAN.My Provider provides my a ADSL-Line with...

Hi all, in a given cisco environemt we use ciscoworks2000 lms. After checking and cfg snmp on the cisco devices we get every hour traps from _failed_ telnet login as source the ciscoworks2k...

Hello, It's best to ask the experts. We have two Catalyst 4006 switches with Supervisor III card. They are our core switches. What redundancy/load balancing possibilies do we have? Thanks, Rutger

How can i get traffic info on my router 2610, i need to know which protocol is taking my bandwith.

I need some help/direction on setting up redundancy in the following situation: Site A: ********************************************************************** * ISP A (E1)-----PIX Firewall----3725...

hello, i have some pix(version 6.2, 6.3) which are currently doing login-authentication(ssh) against local defined users. Now i want to use a TACACS-Server for user-authentication and...

I have a Cisco 806 router/firewall and have been playing around with the rate-limit and traffic-shape commands as well as various policy-map and class-map options - I found some tutorials on the...

Hello, I want to use my PIX 501 only for HTTP and shoutcast Stream (Port 8002) für Inside-> Out. This is my config file... I want to no, is this ok or want can/must I change?? THX Tobi : Saved

What does a link light on a router mean? Does it mean that the router and NIC both have power? More than that? I had a link on a router, but could not ping the router from the PC. I switched...

I came across this document - http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a0080094797.shtml#event It mentions that on 4000, 5000, and 6000's are able to show port and ID...

Hello, we currently have a VPN set up between a cisco router 1712 and a PIX 525. It has been working fine during a time and we have now some problems of intermittent disconnections (up for about 1...

I've been living in the US for 30 years, but feel the need to move back to India. I have 10 years of networking experience, CCNP, CCDP, and have filled out the job application at the Cisco web site,...

I have never worked with open source.Does anybody know what to do after downloading VOCAL