On boot up on my Cisco 837 I get the following error. NAT: Error activating CNBAR on the interface Ethernet0 Does anyone know what this means, I searched on google and cisco, but get nothing...

I'm trying to get the Pix (192.168.60.1) to route requests for 10.10.0.0 trough another router (192.168.60.150) that has it's own network on the other side (10.10.0.0). I have used this...

Hi All, We are connecting a Intrusion Detection box with the capability of URL blocking based on content to a Cisco 6500(IOS based) span port. Now the blocking is not working, which can work on a...

Hello, I have a PIX 501 - 1 Port outside - 4 Port Switch inside Can I change this? -4 Port Swich Outside -1 Port inside

Hi all Is it possible to share 2 adsl on a single lan with PF and Altq ? Thanks Giacomo

Good afternoon, I'm having a bit of a problem with slow download speeds to some computers, but the outbound speeds are fine. The computers in questions are connected to a 6509 switch via Gigabit...

using a 515E, PDM version 3.0, firewall version 6.3. I have a client (home user) using a dynamic SA (let me know if I'm not saying this right, PIX is not my specialty) and he was connected to our...

Hallo !! help me please i have a cisco 2600 series ( 2610 ) and i haven't got his ip Address. i tried to enter with the hyper terminal and console but nothing!! I think the router is ok and the...

Hi Can anyone point to the right direction with a 801, running ios 12.2(24) with crypto features. i ran the crypto key gen rsa command, but ssh seems to be faulty. while trying to access the...

With the newest IOS and a minimum configuration the serial port comes up, line protocol comes up - but the protocol goes down for 3 seconds, remains up for 27 seconds and repeats this up/down cycle. ...

With the newest IOS and a minimum configuration the serial port comes up, line protocol comes up - but the protocol goes down for 3 seconds, remains up for 27 seconds and repeats this up/down cycle. ...

Hi All, I'm using a Cisco 2621 router running IOS 12.2, and currently have an access list defined to act as a basic firewall. However the Nessus security tool uncovers the following problem: " The...

.....spend so much time at work in the personals...

Hi, My PIX firewall IPsec configuration disappear suddenly without apparent reason, I need to reconfigure again. Anyone knows what could have caused this? I am using PDM to configure. i) IKE...

Anyone got a Catalyst 3900 TokenRing Switch for sale (or free) in Norway (or anywhere else in Northern Europe)? I need one for my Lab-racks... (And YES, I know Token Ring is not an issue on any...

I bought a few of these on Ebay and the guy does not know the passwords. Any way to get the passwords OR reset them to factory default? TIA, Mike -----= Posted via Newsfeeds.Com, Uncensored...

I installed Cisco IPSec VPN Clinet 4.03F on Windows 2000 SP3 which worked well. After that I created it's RIP using Altiris Rapid Install. Un-installed the VPN Client and installed using the...

Hi, Could anybody share suggestion for above configuration - switching-type, network/user side, Siemens protocol for BRI port etc. With basic-net3 switching type I have limited success - calls go...

Learn VOIP, free resources -- http://www.intersyncsolutions.com A new voip content site with: -voip industry news -links, tutorials, pdf's, whitepapers -tutorials on H.323, SIP, MGCP/MEGACO, RTP

Why don't you just block these sites by ACL? "David Arnstein" <arnstein@panix.com> wrote in message news:c9hcds$lth$1@reader2.panix.com...