- Cisco VPN 3005 and DHCP relay
- Posted on May 25th, 2004 | 0 Comments
Hello! We have two problems with DHCP-relay on a Cisco VPN 3005 and Cisco software VPN clients ver. 4.0.4(rel). 1: The DHCP relay is working, but is not passing through all DHCP options. The most...
- VPN Client cannot see "other" server
- Posted on May 25th, 2004 | 1 Comments
Hello: I am fairly new to using VPN client software and have a question that I was hoping someone could answer for me. I am also new to system administration. We have two offices, office A and...
- Anyone using Cisco Secure Agent?
- Posted on May 25th, 2004 | 0 Comments
Your thoughts? What helped you make the decision to purchase? Thanks!
- newbie - PIX 501 sufficient
- Posted on May 25th, 2004 | 6 Comments
Hi, I am quite new in the VPN world and would appreciate if I can get a confirmation on the following before I invest in hardware: I read the posts in here and still are not sure whether the...
- Cisco 801 - won't ping after restart
- Posted on May 25th, 2004 | 3 Comments
I've bought a second-hand 801 to install for a charity's office. I managed to reset passwords, and have run FastStep - apparently quite happily: it reports all the testing OK, and immediately after...
- Gender Changing a X21 DCE cable (go from female to male)
- Posted on May 25th, 2004 | 2 Comments
Hi, would there be any disastrous effect if I converted a X21 DCE cable (female DB15) to male DB15? I realise I should buy a DTE cable, but I'm interested to see if I can do without...
- Connection trouble SOHO 77
- Posted on May 25th, 2004 | 7 Comments
Hi My ISP supplied me with a Zyxel 650R DSL router running PPPoA, it connects perfectly. As I'm used to configuring a Cisco SOHO 77 and find it more stable I would like to use that one, however when...
- SOHO 78
- Posted on May 25th, 2004 | 2 Comments
Hi, Is it possible to connect a Cisco SOHO 78 G.SHDSL Router to an ADSL line in the UK ? and will it work. My understanding is that the SOHO 78 is for Symetric DSL but, can you get the i/f to work...
- Cisco 7200 IOS installation
- Posted on May 25th, 2004 | 3 Comments
Hi Guys, I am facing problem to upload IOS on Cisco 7200 series router. I rebooted my box but I am keep on getting same output. I am stuck and I don't know what to do can anyone help me how to...
- Network tools for managing smaller ISP MPLS network
- Posted on May 25th, 2004 | 2 Comments
Hi, I was wondering what network monitoring tools would be appropriate for managing some small ISP network (couple of POPs), very easy and intuitive design. Until now their tools were mrtg/rrd for...
- PIX-506E config Help Please!~
- Posted on May 25th, 2004 | 7 Comments
I am setting up a firewall to protect our office from a new dept. I want our office (inside 172.x.x.x) to be allowed to see all thier stuff (outside 200.1.1.x)and only a few of them able to see our...
- There are few changes in CCIE Security LAB
- Posted on May 25th, 2004 | 0 Comments
Hi all, Cisco is now going to change it's ccie security. they are now going to remove r@s stuff and put more security related topics from this lab.. u can find more info...
- Catalyst 1924-EN-DC
- Posted on May 25th, 2004 | 3 Comments
I bought a Catalyst 1924-EN-DC switch off of ebay, not realizing that the DC stood for Direct Current. Does anyone know how to connect this to a home wall outlet. Some type of converter or...
- Cisco CallManager 4.01sr2 and JTAPI getStatus()
- Posted on May 25th, 2004 | 1 Comments
Hello. I'm trying to get an endpoint status information from JTAPI using getStatus method. It looks like CCM is always returning 0 (OUT_OF_SERVICE) even if the phone is fully working. This is what...
- GRE IPSEC and Loopback interface
- Posted on May 25th, 2004 | 0 Comments
Dear all Please excuse my ignorance, but I've been struggling for about 2 months now with configuring GRE over IPSEC using a Loopback interface as the source of the tunnel. I wish to tunnel all...
- "LINUX Cisco VPN Client" to "PIX 501"
- Posted on May 25th, 2004 | 1 Comments
Hi folks, I'm trying to help someone setup a Cisco VPN client on a LINUX box and he can't see anywhere to put the groupname and password, is he missing something? How else can he connect? I already...
- loading cisconet.cfg [timed out]
- Posted on May 25th, 2004 | 5 Comments
I continure to get these error messages on my 2503 router (Cisco 3200 ws-x3011 blade) loading cisconet.cfg , Loading cis2503-confg , loading cis2503.cfg , Can any one telll me what this is all...
- CCNP recert
- Posted on May 25th, 2004 | 4 Comments
Hi all, What is the best way to prepare for CCNP recertification? 1. Do I need to read all my old four books again? 2. Do I need to purchase all new four books? 3. Are there any single book just for...
- New 2610XM vs 2621?
- Posted on May 24th, 2004 | 7 Comments
We are upgrading our Internet connection and the new connection comes with a free 2610XM router. We have an Existing 2621 router that it was going to replace. What are the Differences between the...
- Flash Upgrade Help
- Posted on May 24th, 2004 | 5 Comments
I am trying to upgrade the flash on my Cisco 3640 router and after I install the new chips, I restart the router, and I get this message: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT...

