Yep - I'd agree. You can't use this for anything other than dial out on a POTS line. For what you want, you need NM-16A, NM-32A, NM-8A/S or NM-16A/S Andrew On Tue, 9 Oct 2007 21:31:14 +0100,...

On 9 Oct, 19:00, "Bobby Brady" <bbr...@multipro.com> wrote: Bobby, I would paste the relevant part of your config just so it is clear what you have and what you are doing. If you have say static...

I have a remote 350 bridge (not workgroup) in a very inconvenient location that I can only connect to wirelessly. I (unwisely as it turns out) tried to do a carrier test on the remote bridge. The...

On 9 Oct, 13:25, Frank Winkler <frank-use...@kfw-family.org> wrote: addresses 172.22.x.x ; this was include in my original access list...but it still didn't work.. (I added another pool to use...

Hi I've had some really weird problems with my FWSM after a migration this weekend. The network as set up as seen below, "ApplicationNet" and "UserNet" have the same security level and I have "same...

Hi guys, i have bypasses our internal proxy through route-map to firewall and allowing Guest subnet to access internet; but i am facing now the ISP proxy. Regads, Andy

On 8 Oct, 09:15, Peter Danes <p_da...@gmail.com> wrote: That would be required.

Thanks for your comments Merv. Control plane policing works great where you need to protect the central packet processing engine in a switch or router from DOS attacks coming in on the line cards. It...

Hello, I was hoping someone would have some helpful input with a weird problem: Our 2948 works great while it is connected to the power, it boots reboots and all the configs are in good order. When...

On Oct 6, 2:08 am, Merv <merv.hr...@rogers.com> wrote: Thank you Merv!

On Sep 29, 6:29 pm, jas0n <n...@thank.you> wrote: jas0n, I am not too sure on updating the software via Group Policy but we use Microsoft SMS to upgrade the Cisco VPN client software with no...

In article <1191860588.089326.93510@22g2000hsm.googlegroups.com>, juanbabi@gmail.com <juanbabi@gmail.com> wrote: The only way to update the signatures is to upgrade PIX versions. There were no...

Just trying to understand this a little better. In my lab I have 2 x routers - 1 x serial connection between them. Each router has a LAN and I have set up a simple QoS policy and given the Priority...

On Oct 8, 7:03 am, "Martin Leduc" <marle...@videotron.ca> wrote: I would check into committed access rates (CARs). Not sure if that model of router supports it, but if it does, you could put a...

Download documentation http://cco.cisco.com/en/US/products/hw/switches/ps607/tsd_products_support_eol_series_home.html Port monitoring configuration Catalyst Switched Port Analyzer (SPAN)...

On Oct 7, 11:05 am, chucho11...@gmail.com wrote: You should check the Linksys web site www.linksys.com You should check if you have the latest firmware for the rv042 - see the linksys site for...

On Oct 7, 10:00 am, Trendkill <jpma...@gmail.com> wrote: Here: http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015c612.shtml#support Click on "Feature Summary and...

ClearPath IT is a full-service IT staffing company. We work with many of the Fortune 1000 companies, both here in Houston and nationwide. ClearPath IT has more than 60 years experience in the IT...

Hi, What's the best book to start learning ASA Firewall ? (I have 2y experience in PIX) Thank you, Akut

Doug McIntyre wrote: cisco supplies ones or buy kits and pin out the same as the cicso ones. By using the various adapters and either a rolled cisco cable with the RJ-45 on each end, or a straight...